Archive for the ‘Plumbing’ Category

« Older Entries

Faucet Aerators Can Improve Dana Point Bathroom Plumbing

Monday, May 14th, 2012

A tap aerator or faucet aerator is located on the tip of water faucets which are used indoors for kitchen and bathroom plumbing in Dana Point.  Their purpose is to spread the water stream into a number of smaller streams, in essence adding air to the water stream.  This saves the amount of water which comes out of the tap at one time while also reducing the amount of backsplash which occurs when the faucet is turned on.

Utilizing faucet aerators can be one of the most inexpensive plumbing installations that can save you money on water consumption and save energy.

There are two main types of faucet aerators, some which use metal or plastic screens to separate the water, and some which do not use screens. One advantage to those without screens is that they eliminate problematic clogging which occurs on screen aerators due to sediment buildup.  There are also aerators with off-valves and swivel aerators which allow users to direct flow to wherever the water spray is needed.

There are three main flow-types seen today. The needle method creates a circular pattern of small, single streams of water with no water-flow in the very center.  The aerated method created a tubular flow with air mixed into the water, creating a single stream of bubbly water.  The laminar method has no air mixed in which makes for a single stream of water with no bubbles.

Many aerators are designed as more economical low-flow aerators which optimize the water flow while still providing optimal water-flow performance.  In kitchens these low-flow options decrease flow from 2.2 gallons per minute to 1.5 gpm or 1.0 gpm, saving anywhere from 32% to 54% of water-usage.  On bathroom faucets the water-flow is decreased from 2.2 gpm to 1.0 gpm or even 0.5 gpm saving from 77% to 84% of water usage.  When engineered properly, low-flow or economic aerators can provide increased perceived water pressure while in actuality helping to save water.

When purchasing new faucet aerators, ensure that you find the proper type (male or female) and the proper size (regular or small).  There are dual-thread options for those who do not know whether a male or female aerator is necessary.  Also, look at the tap aerator’s price in conjunction with how much savings it can provide in water usage annually and see how little must be spent on each faucet in order to save hundreds of dollars.  When you need plumbers in Dana Point call Saddleback Plumbing

Tags: , ,
Posted in bathroom plumbing, Inexpensive Plumbing Installations, Plumbing | Comments Off

Sump Pump Maintenance in Orange County is Easy in the Spring

Monday, May 7th, 2012

For those of us with sump pumps in Orange County, their maintenance is one of the most important things to make a little time for on a regular basis.  If a sump pump is not working properly it could mean flooding of a home or office building that sits below the water table level, or that had a basement waterproofing system in place.  Flooding can mean excessive damage to not only the basement, but to any other lower floors, and even foundation damage which will all then need to be repaired or replaced completely.  With such simple precautionary steps as performing a few quick plumbing maintenance checks it is easy to keep that sump pump running properly without such damage.  A good time to go about sump pump maintenance is during early Springtime prior to the rainy season when the weather changes once again and other areas of the home or building are being checked as well.

  • For electric sump pumps: Ensure the sump pump is plugged into a working outlet, and that the cord is in good shape.  Due to the damp, the breakers on these outlets can trip more easily, which then shuts off the sump pump.  This is a simple fix as the breaker just needs to be reset.
  • For battery powered sump pumps: replace the battery as often as is recommended by the manufacturer.  On back-up battery powered pumps, replace the battery every two to three years.
  • Check that the sump pump is standing upright.  Since sump pumps vibrate they can fall to one side, which can jam vital parts, causing it not to activate properly.  While upright, all working parts should be free to move as necessary.
  • Pick up submersible pumps to clean the grate on the bottom.  Ensure that there are no small stones in the grate which could block the inlet or damage the pump.
  • Check that outlet pipes are tightly joined together, check that their outlet is at least twenty feet from the foundation of the home or building, and that when the sump pump is on it is actually removing water through the pipes.
  • Clean the vent hole in the discharge pipe, remove any debris which was stuck in it.

Besides performing maintenance on a sump pump annually, it is good to check it again after heavy rains to ensure that it is still removing water properly.  Also check it after longer dry spells by dumping a bucket or two of water near the machine to make sure it starts up automatically and that it drains efficiently.  While most new models have indicators which alert you when the pump is not working properly, it is still good to physically check the machine periodically to ensure it is running properly.  With proper sump pump maintenance your sump pump will give you great service for a long time.  Call Saddleback Plumbing to schedule your next simp pump maintenance vist.

Tags: , ,
Posted in Plumbing, Plumbing Maintenance, Sump Pumps in Orange County | Comments Off

New Fixtures in Newport Beach: A Low Cost Way to Brighten a Kitchen or Bath

Monday, April 23rd, 2012

Many older homes in Newport Beach still have the original faucets, toilets, shower heads, and other plumbing fixtures and are in desperate need of plumbing replacements. Like most contractor-grade components, those fixtures were  probably designed to be strictly practical, with very little styling or decorative flair.

Contractors aren’t architects or interior designers. They’re focused mainly on installing the infrastructure of the plumbing system – the water delivery and waste pipes. It’s not their job to pick out elegant or cutting edge fixtures. They also can’t predict the taste of a home’s future occupants, so it makes no sense to install distinctive fixtures that might be removed or, worse, contribute to a potential buyer’s negative impression of the home.

That means many homeowners spend years living with plumbing fixtures deliberately intended to be bland and unnoticeable. There’s nothing wrong with that, but consider how many times each day we use our bathroom and kitchen plumbing. How many times per week do we take a bath or use the shower? The simple pleasure of seeing and touching an attractive, well designed faucet is a little perk that can help brighten the day.

Higher end plumbing fixtures can be pricey, but factor in how long most fixtures last and you’re only paying a few pennies or less per day. Plumbing fixture design has become much more consumer-driven. Companies must compete by offering an expanding variety of styles.  The new passion for cooking has increased the demand for professional grade kitchen faucets that can stand up to hard use, have pullout sprayers, and accommodate large pans. New shower head designs provide a more comfortable, invigorating spray. Sink faucets with elegant finishes of bronze, brushed nickel, or brilliant brass can liven a bathroom. Ergonomically correct handles are easier to use and more inviting to touch.

There are also practical reasons for replacing fixtures. With improvements in materials technology the interior seals of faucets and other fixtures are more resistant to mineral build up and corrosion that can cause leaks. Metal finishes are more durable and resistant to dulling from soap or detergent.

Installing a new, attractive faucet won’t provide a total kitchen or bathroom makeover, but it will provide a spark that brightens the room and makes everyday living just a little more fun.  Call Saddleback Plumbing to get started today.

Tags: , ,
Posted in Bathroom and Kitchen Plumbing, bathroom plumbing, Plumbing | Comments Off

How to Increase Your Water Pressure in Huntington Beach

Thursday, March 15th, 2012

As a Huntington Beach resident it’s no fun when you are in the middle of taking a shower and your bathroom plumbing slows to a trickle. The most logical thing to blame the loss of water pressure is a toilet being flushed or a washing machine being filled. It is not uncommon for losses in water pressure to be associated with simultaneous water usage in other parts of the home.

But if low water pressure seems to be a constant problem when only one source is being used and there are no other appliances using water at the same time, you may have a bigger problem on your hands.

The first thing to do is to check the source of the water supply to your outdoor faucets. Turn the hose bibs to the fully open position and run the water. Is the pressure okay? If so, you probably have a problem indoors. While you are outside, check for any leaks in the hose bibs or faucets. A leak can cause a loss of water pressure in other plumbing circuits.

Now check the hose bibs on the lines leading to interior fittings, like faucets or showerheads, etc. Is the hose bib turned to the fully open position? Someone may have been playing with the bib and turned it down or off. If that checks out okay, take a look at all of the fittings in your plumbing fixtures. Are there any leaks? Is there standing water anywhere, indicating a leak?

If so, tighten up the affected fittings. If you need to remove any fittings to inspect or replace (i.e. a worn out washer or bushing), make sure you turn off the water line to the fitting first.

If there are filter screens in your faucets check them for an accumulation of debris and clean if necessary. A clogged screen can greatly reduce water pressure.

Many new homes now come with a pressure regulator, which governs the water pressure going into the home. The regulator is located above ground, usually where the pipes enter the home. The pressures are usually preset by the regulator manufacturer but may not always be compatible to the local environment. If you think that may be the problem, contact Saddleback Plumbing for a professional opinion.

A disruption in the piping that feeds water into the home can also affect water pressure, such as tree roots in the pipes or a break in the line. These problems can only be diagnosed and corrected by qualified plumbing professionals. Please do not attempt to find and fix these problems as the result may be costly or even dangerous to your health.

Low water pressure can be a drag but it may also only require a quick fix.

Tags: , ,
Posted in bathroom plumbing, Plumbing, Water Lines | Comments Off

Happy Valentine’s Day from Your Orange County Plumbing Experts

Tuesday, February 14th, 2012

Everyone at Saddleback Plumbing wishes you a Happy Valentine’s Day! Valentine’s Day is all about showing your appreciation for your loved ones. Whether it is your significant other, your family, or your friends, today is a great day to let them know how special they are to you. A handmade card, a bouquet of flowers, or even a simple phone call can make someone’s whole day.

If you are thinking about a big gift for your family, an upgrade to your kitchen plumbing might not be the most romantic gift, but it is a gift that keeps on giving! A new garbage disposal will make doing the dishes much easier, or new faucets could give your whole kitchen a bright new look. Give your kitchen an upgraded feel that your whole family will appreciate!

Call Saddleback Plumbing to learn more about how some plumbing upgrades could improve the comfort level in your home. And to make your Valentine’s Day a little sweeter, here is a recipe for Chocolate Covered Strawberries

INGREDIENTS:

16 ounces milk chocolate chips

2 tablespoons shortening

1 pound fresh strawberries with leaves

DIRECTIONS:

  1. Insert toothpicks into the tops of the strawberries.
  2. In a double boiler, melt the chocolate and shortening, stirring occasionally until smooth. Holding them by the toothpicks, dip the strawberries into the chocolate mixture.
  3. Turn the strawberries upside down and insert the toothpick into styrofoam for the chocolate to cool.

For more details, visit allrecipes.com.

Tags: , ,
Posted in Kitchen Plumbing, Plumbing, Plumbing Maintenance | Comments Off

Corona Del Mar Plumbing Tips: How to Install a Toilet

Monday, February 13th, 2012

A toilet is a relatively basic piece of bathroom plumbing equipment for a Corona Del Mar resident to install, but that does not mean that installing it is easy. This is certainly a plumbing maintenance that many people can do on their own, but you should be prepared to devoting the majority of your day to the project. While the installation itself is not terribly complicated, it is quite important that you get it right, so make sure you have all of the necessary materials, equipment and tools before you begin.

The first thing to remember is that you need to install your toilet in an appropriate place relative to the rest of your bathroom plumbing. Especially if you are installing your toilet along a branch drain, make sure that the sink, shower and any other plumbing fixtures are upstream of the spot where you will be installing the toilet.

You will also need to make sure that you install the toilet an appropriate distance from the wall. You need to be able to get around the toilet, and you also want to leave space so that work can be performed on the unit later. Putting your toilet too close to the wall can cause all kinds of complications in the way the unit functions and there is also a possibility of condensation build-up. For all of these reasons, it is important to make sure you are allowing an adequate amount of space on all sides.

The procedure you will have to follow when installing a toilet will be slightly different depending on whether you are installing it in a new spot or simply replacing an existing unit. When replacing an old toilet, you need to remove everything involved in the previous installation. That means taking the old bolts out of the floor and scraping away any residue to ensure that you have a clean and even surface to begin your installation on.

You should also make sure that you are aware of all applicable local codes before you begin your work. Even if you technically install your toilet correctly, you could run into trouble later on if your installation is not actually up to code. It is also important to remember to level all of your fixtures before you complete the installation process and to make sure you use a dielectric or brass fitting when attaching galvanized steel and copper to each other.  If you have any questions about this process please call Saddleback Plumbers

Tags: , ,
Posted in bathroom plumbing, Plumbing, Plumbing Maintenance | Comments Off

Laguna Niguel Plumbing Repair – Review from M.A.

Wednesday, December 28th, 2011

When you have a plumbing emergency, it is very important to have a plumber that you can count on. You not only want them to be technically skilled, but you also want superior customer service so you know that your problem will be taken care of right away. A good plumber will also answer any questions you might have and perform work that exceeds your expectations.

At Saddleback plumbing, we don’t just promise great service and repair, we deliver it. That is why so much of our business comes from repeat customers. Here is what M.A. in Laguna Niguel wrote to us about his plumbing repair:

Just a quick note to let you know how happy I am with your company. I have had a few plumbing issues and Saddleback Plumbing, Inc. has never let me down. Every step of contact with your company has been positive… I am a customer service expert/advisor. It is a rare occasion when I come across true customer service. … I will always be a customer and sing the praises of Saddleback Plumbing, Inc. and Jared [who went above and beyond the call]. Thanks for maintaining a locally owned company that serves our community with such professionalism and concern.

- M.A. Laguna Niguel, CA

Thank you for choosing Saddleback! Whether your sink is clogged or your furnace has stopped working, our expert technicians will fix the problem as quickly as possible. Don’t hesitate to call for repairs this winter, stopping a problem early can save you a lot of money in the long run!

Tags: ,
Posted in Plumbing | Comments Off

Signs that You Have Hard Water in Brea

Monday, December 26th, 2011

Hard water is fairly common, especially in certain regions of the country. It is called hard water because of the minerals in it, such as calcium, iron and lime. Depending on how “hard” the water is, it’s usually perfectly healthy, but can cause some other problems throughout your Brea home.

Hard water can negatively affect the durability of household appliances like dishwashers and washing machines, as well as pipes and fixtures throughout the home. How do you know if you have hard water? Here are some common signs and symptoms to be on the lookout for:

  1. A white, scaly, filmy residue left behind on plumbing fixtures. In particular, you may notice these on showerheads, on stainless fixtures like the basin of your kitchen sink, on your silverware or in the coffee pot.
  2. Clothes that are not getting as clean as they should in the laundry. This is because hard water is less effective at washing away dirt. Likewise, you may notice soap scum residue in your tub or shower.
  3. Little or no lather from shampoo or soap while showering.
  4. A reddish tinge to hair over time. This is due to iron in the water that can temporarily change hair color in the shower.
  5. Water takes a long time to heat, or heating costs that are higher than usual. This is because hard water requires more heat than water with fewer minerals in it.
  6. A foul odor emanating from your water.

If you notice any of these signs, or a combination of them, you may have hard water. There are certain things you can do to control the effects of hard water, such as using a commercial mineral remover to dissolve deposits left on showerheads and other fixtures. Vinegar also works well.

However, the best thing to do is to treat hard water so that it does not damage your plumbing system. A licensed Brea plumber can help you do this by adding water softener to your water supply, among other treatments. These are things that need to be done on an ongoing basis, but will help extend the life of your expensive appliances and plumbing system.

Tags: , , , , , ,
Posted in Plumbing | Comments Off

Dove Canyon Plumbing Tip: How to Change a Drain Trap

Monday, December 19th, 2011

Have you ever noticed that U-shaped length of pipe below your Dove Canyon home’s bathroom or kitchen sink? Does it ever seem to you like it doesn’t make sense to have that in there? It seems counterintuitive to have the water run any direction other than straight down.

Well, that little bend is the drain trap, and it keeps nasty odors and gases from wafting their way up through the plumbing and into your home. The U shape of the trap precludes the normal upward drift of the gases, so they don’t make it up through your drain.

After a while, these traps can become corroded, choked with debris or entirely clogged to such a degree that it needs to be replaced. When this happens, it is important to take care of this right away.

As with any plumbing project, the first step is to turn off the main water supply. Don’t worry about the inconvenience; the whole process will take less than an hour.

Next, remove all the pieces of the existing drain trap. Use a pipe wrench and/or slip-joint pliers to remove the nuts and pull the trap free. Attach a tailpiece washer to your new tailpiece, and then attach the tailpiece to the sink strainer. You may need to cut the tailpiece to length with a hacksaw.

With a slip nut and washer, affix the trap arm to the drain stub. Again, you may need to cut the trap arm to length.

Finally, attach the trap bend to the trap arm, making sure the beveled face of the washer faces the trap bend. Tighten all the nuts and turn the water back on. Run a little water down the drain and check for leaks before using it. You may need to tighten some joints or apply Teflon tape in some places.

Once everything is all sealed up, you’re good to go! Your new drain trap is in place and ready to use.

Tags: , , , , , ,
Posted in Plumbing | Comments Off

A Question from Huntington Beach: What Is a Slab Leak and What Damage Can It Cause?

Friday, December 9th, 2011

Also known as a foundation leak, slab leaks can cause a serious problem in your Huntington Beach home. A typical cause of a slab leak occurs when the foundation for the home is poured. While the cement is still wet and setting, copper pipe is laid in to run wherever it needs to go for the plumbing system of the home. This is a fairly common practice.

The problem occurs when the copper piping is soft. As the cement hardens, any kinks, bends, nicks or other imperfections in the pipe are exacerbated. Over time, these problems can become more and more magnified, eventually resulting in one or more tiny leaks in the pipe. This causes water to leak directly into the concrete foundation.

This causes a number of problems for homeowners, both short-term and long-term. In the short-term, it reduces water pressure and increases water consumption, resulting in higher monthly bills for poorer water delivery. These are inconveniences and annoyances, but nothing compared to the long-term damage that a slab leak can cause.

The moisture in the foundation becomes a breeding ground for mold. This mold can spread throughout the foundation and the house, which is a serious health risk for you and your family. Mold and mildew spores negatively impact air quality and can lead to illness. Plus, the moisture weakens the foundation gradually over time. Eventually, you have a home that is less structurally sound and may succumb to mold, which can cause thousands of dollars to eradicate and repair.

Slab leaks can be repaired, but sometimes after repairing one, another will crop up shortly thereafter. However, they still must be repaired immediately before the problem spreads and becomes too big to handle.

There are a few different methods for repair, including breaking up the foundation with a jackhammer and laying new pipe or lining the existing pipe with epoxy. Consulting with a professional is the best way to figure out which method is right for you.

Common symptoms to detect slab leaks early are reduced water pressure or inexplicably high water bills. If you notice either of these occurring in your home, you may have a slab leak, so call a professional to get it checked out right away before it leads to much bigger problems.

Tags: , , , ,
Posted in Plumbing | Comments Off

« Older Entries