Archive for the ‘bathroom plumbing’ Category

Faucet Aerators Can Improve Dana Point Bathroom Plumbing

Monday, May 14th, 2012

A tap aerator or faucet aerator is located on the tip of water faucets which are used indoors for kitchen and bathroom plumbing in Dana Point.  Their purpose is to spread the water stream into a number of smaller streams, in essence adding air to the water stream.  This saves the amount of water which comes out of the tap at one time while also reducing the amount of backsplash which occurs when the faucet is turned on.

Utilizing faucet aerators can be one of the most inexpensive plumbing installations that can save you money on water consumption and save energy.

There are two main types of faucet aerators, some which use metal or plastic screens to separate the water, and some which do not use screens. One advantage to those without screens is that they eliminate problematic clogging which occurs on screen aerators due to sediment buildup.  There are also aerators with off-valves and swivel aerators which allow users to direct flow to wherever the water spray is needed.

There are three main flow-types seen today. The needle method creates a circular pattern of small, single streams of water with no water-flow in the very center.  The aerated method created a tubular flow with air mixed into the water, creating a single stream of bubbly water.  The laminar method has no air mixed in which makes for a single stream of water with no bubbles.

Many aerators are designed as more economical low-flow aerators which optimize the water flow while still providing optimal water-flow performance.  In kitchens these low-flow options decrease flow from 2.2 gallons per minute to 1.5 gpm or 1.0 gpm, saving anywhere from 32% to 54% of water-usage.  On bathroom faucets the water-flow is decreased from 2.2 gpm to 1.0 gpm or even 0.5 gpm saving from 77% to 84% of water usage.  When engineered properly, low-flow or economic aerators can provide increased perceived water pressure while in actuality helping to save water.

When purchasing new faucet aerators, ensure that you find the proper type (male or female) and the proper size (regular or small).  There are dual-thread options for those who do not know whether a male or female aerator is necessary.  Also, look at the tap aerator’s price in conjunction with how much savings it can provide in water usage annually and see how little must be spent on each faucet in order to save hundreds of dollars.  When you need plumbers in Dana Point call Saddleback Plumbing

Tags: , ,
Posted in bathroom plumbing, Inexpensive Plumbing Installations, Plumbing | Comments Off

New Fixtures in Newport Beach: A Low Cost Way to Brighten a Kitchen or Bath

Monday, April 23rd, 2012

Many older homes in Newport Beach still have the original faucets, toilets, shower heads, and other plumbing fixtures and are in desperate need of plumbing replacements. Like most contractor-grade components, those fixtures were  probably designed to be strictly practical, with very little styling or decorative flair.

Contractors aren’t architects or interior designers. They’re focused mainly on installing the infrastructure of the plumbing system – the water delivery and waste pipes. It’s not their job to pick out elegant or cutting edge fixtures. They also can’t predict the taste of a home’s future occupants, so it makes no sense to install distinctive fixtures that might be removed or, worse, contribute to a potential buyer’s negative impression of the home.

That means many homeowners spend years living with plumbing fixtures deliberately intended to be bland and unnoticeable. There’s nothing wrong with that, but consider how many times each day we use our bathroom and kitchen plumbing. How many times per week do we take a bath or use the shower? The simple pleasure of seeing and touching an attractive, well designed faucet is a little perk that can help brighten the day.

Higher end plumbing fixtures can be pricey, but factor in how long most fixtures last and you’re only paying a few pennies or less per day. Plumbing fixture design has become much more consumer-driven. Companies must compete by offering an expanding variety of styles.  The new passion for cooking has increased the demand for professional grade kitchen faucets that can stand up to hard use, have pullout sprayers, and accommodate large pans. New shower head designs provide a more comfortable, invigorating spray. Sink faucets with elegant finishes of bronze, brushed nickel, or brilliant brass can liven a bathroom. Ergonomically correct handles are easier to use and more inviting to touch.

There are also practical reasons for replacing fixtures. With improvements in materials technology the interior seals of faucets and other fixtures are more resistant to mineral build up and corrosion that can cause leaks. Metal finishes are more durable and resistant to dulling from soap or detergent.

Installing a new, attractive faucet won’t provide a total kitchen or bathroom makeover, but it will provide a spark that brightens the room and makes everyday living just a little more fun.  Call Saddleback Plumbing to get started today.

Tags: , ,
Posted in Bathroom and Kitchen Plumbing, bathroom plumbing, Plumbing | Comments Off

How to Increase Your Water Pressure in Huntington Beach

Thursday, March 15th, 2012

As a Huntington Beach resident it’s no fun when you are in the middle of taking a shower and your bathroom plumbing slows to a trickle. The most logical thing to blame the loss of water pressure is a toilet being flushed or a washing machine being filled. It is not uncommon for losses in water pressure to be associated with simultaneous water usage in other parts of the home.

But if low water pressure seems to be a constant problem when only one source is being used and there are no other appliances using water at the same time, you may have a bigger problem on your hands.

The first thing to do is to check the source of the water supply to your outdoor faucets. Turn the hose bibs to the fully open position and run the water. Is the pressure okay? If so, you probably have a problem indoors. While you are outside, check for any leaks in the hose bibs or faucets. A leak can cause a loss of water pressure in other plumbing circuits.

Now check the hose bibs on the lines leading to interior fittings, like faucets or showerheads, etc. Is the hose bib turned to the fully open position? Someone may have been playing with the bib and turned it down or off. If that checks out okay, take a look at all of the fittings in your plumbing fixtures. Are there any leaks? Is there standing water anywhere, indicating a leak?

If so, tighten up the affected fittings. If you need to remove any fittings to inspect or replace (i.e. a worn out washer or bushing), make sure you turn off the water line to the fitting first.

If there are filter screens in your faucets check them for an accumulation of debris and clean if necessary. A clogged screen can greatly reduce water pressure.

Many new homes now come with a pressure regulator, which governs the water pressure going into the home. The regulator is located above ground, usually where the pipes enter the home. The pressures are usually preset by the regulator manufacturer but may not always be compatible to the local environment. If you think that may be the problem, contact Saddleback Plumbing for a professional opinion.

A disruption in the piping that feeds water into the home can also affect water pressure, such as tree roots in the pipes or a break in the line. These problems can only be diagnosed and corrected by qualified plumbing professionals. Please do not attempt to find and fix these problems as the result may be costly or even dangerous to your health.

Low water pressure can be a drag but it may also only require a quick fix.

Tags: , ,
Posted in bathroom plumbing, Plumbing, Water Lines | Comments Off

Corona Del Mar Plumbing Tips: How to Install a Toilet

Monday, February 13th, 2012

A toilet is a relatively basic piece of bathroom plumbing equipment for a Corona Del Mar resident to install, but that does not mean that installing it is easy. This is certainly a plumbing maintenance that many people can do on their own, but you should be prepared to devoting the majority of your day to the project. While the installation itself is not terribly complicated, it is quite important that you get it right, so make sure you have all of the necessary materials, equipment and tools before you begin.

The first thing to remember is that you need to install your toilet in an appropriate place relative to the rest of your bathroom plumbing. Especially if you are installing your toilet along a branch drain, make sure that the sink, shower and any other plumbing fixtures are upstream of the spot where you will be installing the toilet.

You will also need to make sure that you install the toilet an appropriate distance from the wall. You need to be able to get around the toilet, and you also want to leave space so that work can be performed on the unit later. Putting your toilet too close to the wall can cause all kinds of complications in the way the unit functions and there is also a possibility of condensation build-up. For all of these reasons, it is important to make sure you are allowing an adequate amount of space on all sides.

The procedure you will have to follow when installing a toilet will be slightly different depending on whether you are installing it in a new spot or simply replacing an existing unit. When replacing an old toilet, you need to remove everything involved in the previous installation. That means taking the old bolts out of the floor and scraping away any residue to ensure that you have a clean and even surface to begin your installation on.

You should also make sure that you are aware of all applicable local codes before you begin your work. Even if you technically install your toilet correctly, you could run into trouble later on if your installation is not actually up to code. It is also important to remember to level all of your fixtures before you complete the installation process and to make sure you use a dielectric or brass fitting when attaching galvanized steel and copper to each other.  If you have any questions about this process please call Saddleback Plumbers

Tags: , ,
Posted in bathroom plumbing, Plumbing, Plumbing Maintenance | Comments Off