Saddleback Plumbing Heating & Air Blog: Archive for February, 2011

Bathtub Replacement: Why You Should Call a Contractor

Monday, February 28th, 2011

A bathtub replacement is not something you will have to worry about every day. However, there will likely come a time when you do need to get rid of your old tub and put in a new one. Whether your old tub is simply beyond repair or you just decided that it was time for a change, putting in a new bathtub is a significant undertaking.

Even if you have considerable plumbing skills, you would do well to hire an outside contractor to take care of a bathtub replacement or installation project. There are a lot of factors to take into account when you are installing a bathtub in your home, and experienced contractors know what to look for and how to adjust to the various situations that can arise.

For one thing, you will probably have a very hard time physically moving both the old tub being replaced and the new on that needs to go in. And even if you are physically capable of moving this type of heavy equipment, you will still run the risk of damaging other parts of your house in the process. A skilled contractor with a team can much more easily get an old tub out and a new tub in place.

Plus, when you hire a contractor for this type of work, you will most likely not have to worry about how to dispose of your old tub once you are done with it. The majority of contractors will take care of this type of disposal for you, which is a big help since you probably do not want an old bathtub sitting in your yard indefinitely.

Another thing to consider is that the plumbing work needed to properly put a bathtub in place is rather complicated. You need to have relatively advanced plumbing skills in order to carry it out properly. And if you do not manage to complete a proper installation, you will have no end of problems later on. It is well worth the investment to have a contractor come in and install your bathtub when the alternative is paying for more costly repairs later on.

Continue Reading

Tags: , , , , ,
Posted in Services | Comments Off on Bathtub Replacement: Why You Should Call a Contractor

Quick Tips on Toilets

Friday, February 25th, 2011

Quite simply, everyone needs to have a working toilet in their home. Of course, when we do, we tend to take it for granted. Most people really do not know much about how their toilets work and how much water they use, and acquiring that information can be beneficial to you for several reasons. Toilet tips can help you save money, catch problems early and generally get the most out of your toilet.

Water-saving devices are always useful on toilets. Even if you did not buy a water-saver toilet to begin with, you can convert your regular toilet into one by installing a toilet cycle diverter. These great gadgets actually direct some of the water from each flush back into the tank rather than allowing it to run into the toilet bowl itself.

What this does is allow the tank to fill up faster. Less water goes down with each flush and less water is needed to fill up the tank. These devices are relatively easy to install yourself and they can save you a ton in the long run. In fact, the average toilet cycle diverter can conserve up to a gallon of water per flush.

You will also benefit from learning about how your toilet works because it can enable you to catch problems early when they are easy to correct. You may or may not be able to do the corrective work yourself, but at least you can call out a plumber earlier rather than later.

Fixing toilet problems early hopefully means that you will not have to go without a toilet for very long, if at all. And the repairs that you need should be relatively minor and inexpensive. When toilet issues are allowed to persist, they can turn into a much bigger plumbing problem and cause a great deal of inconvenience to you and your family.

One of the most common toilet problems is leaks. A leaky toilet can have all kinds of symptoms, but the bottom line is that it is probably costing you money on your water bill each month. Also, leaks will only get bigger as time goes on, so you will be much better off if you fix them early. Phantom flushing and continuous running are both signs that your toilet is leaking, and the earlier you do something about it, the better off you will be.

Continue Reading

Tags: , , , , , ,
Posted in Services | Comments Off on Quick Tips on Toilets

How Can I Get Better Flow from My Faucets?

Wednesday, February 23rd, 2011

Most of us realize that a drain can get clogged or that the pipes in our home might require extra repairs every now and then, but rarely do we realize that when the faucet is not providing a strong, steady flow of water, it is likely because of a clog in the actual faucet. If you are suffering from low flow in your faucets or worse, sputtering and clogging, here are some tips to help fix the problem.

Why it Happens

The reason that so many faucets now have problems related to clogging is that they have been changed and redesigned over the years to reduce water flow. Older faucets would pour ridiculous amounts of water through the drain – not at all good for the environment. Today, aerators and other technology advancements greatly reduce the amount of water used, but also tend to cause these types of clogs.

Checking Your Aerator

The easiest way to fix a slow flowing faucet is to check the aerator tip for unwanted sediment. Despite filtration of tap water, over time small bits of sand, dirt, and other sediment can and will build up in the aerator. That sediment should be cleaned out of the tip of the aerator at least once a month to keep it from slowing the flow of water.

If a water main breaks somewhere or a problem occurs in the water supply outside of your home, this type of sediment might start to build up more rapidly and cause immediate clogs in your faucet. Other things that might build up include pieces of pipe or flux from plumbing joints that break free and enter the water supply. None of it poses a health problem, but it can be frustrating when it gets into your faucets and blocks the water supply.

Valve Cartridge

If the aerator is not the problem it may be in the valve cartridge. To fix this, you will need to replace the part. Each faucet can be very different, so you should refer to your owner’s manual (many of which are online) for how to take this part out of the faucet assembly. When you go to the hardware store, be sure to take the valve cartridge with you so you can get the exact piece you need for replacement.

The easiest way to avoid a clog in your faucets is to be careful with any repairs you make. While a water main break is not something you can control, you can control how the water supply is affected when someone does repairs on your home’s plumbing. Leave faucets open outside, turn the main valve back on slowly and check your faucet immediately after the repair to ensure no sediment gets clogged in the assembly.

Continue Reading

Tags: , , , , ,
Posted in Services | Comments Off on How Can I Get Better Flow from My Faucets?

Where Are My Shut Off Valves?

Tuesday, February 22nd, 2011

Whenever you want to do some home repairs on your plumbing, whether it is to change a leaky faucet or fix knocking pipes, you need to shut off the main water supply. But, most home owners do not know where their main shutoff valves are, especially if they have just moved in or are renting a home that is unfamiliar to them. To help, here are some common places you can look for shutoff valves in your home.

  • Water Meter – The Water Meter, which you can usually find in your basement or just outside your home, will have a shutoff valve attached directly to it. Usually there will be two shutoff valves – one on each side of the meter (supply and home). To effectively shut off your water supply, turn the valve located before the meter.
  • Toilet Supply – Sometimes you do not need to cut off the main water supply to your entire house. It can be disruptive and the people in your home may not appreciate not having drinking water or a shower while you are working on the plumbing. So, when working on the toilet, always look for the toilet water valve located behind the tank. Sometimes this valve will be on the floor – other times it will be located on the wall just behind the tank.
  • Finding Wily Supplies – Sometimes the water supply may not be located where you would expect. It might be behind appliances or access panels or above your head somewhere. Most of the time, the water supply will still be in the basement, so start there and look carefully for the root of the pipes. Since most of the pipes in your home will originate at the supply line, you can usually trace them back to a single source.

If you still cannot find your main water supply line and shutoff valve, that does not mean it is hidden in the floor somewhere or outside. Sometimes, the supply lines are just in odd places, either because of strange construction or poor renovations by a past owner. If this is the case, get a second pair of eyes to help you hunt or as a last ditch option, call a plumber who will be able to more easily follow the lines back to their source. Nine times out of ten, you should be able to find and handle a main water supply on your own. But never rule out calling for a professional’s help if things get more complicated than anticipated.

Continue Reading

Tags: , , , , ,
Posted in Services | Comments Off on Where Are My Shut Off Valves?

Compression vs. Cartridge Faucets

Friday, February 18th, 2011

If you are like most people, you probably do not think too much about what goes on inside your faucet when you turn it on and off. All you need is for the water to flow when you want it to and to stop when you do not. But when the time comes to replace or repair one of the faucets in your home, it is helpful to know a little bit about how the different types of faucets work and what the pros and cons of each can be.

The oldest and most common types of faucets are compression faucets. When one of these faucets is in the off position, a small washer inside creates a seal that keeps water from flowing through and into the tap. But when you turn the faucet on, the stem inside raises up, which takes the pressure off of the washer and breaks the seal. That allows the water to flow until you lower the stem back down again by turning the faucet off.

These faucets are generally easy to find and relatively cheap. They are also easy to install or repair on your own, and this is fortunate because they do tend to develop leaks periodically. That is primarily because the washer inside will wear out over time and need to be replaced. This is a rather straightforward and simple process, but if you do not want to have to deal with it, you may want to consider your other option.

The other main type of faucet on the market today is a cartridge faucet. Instead of washers, these types of faucets employ a cartridge which seals to the faucet base with several O-rings. These types of faucets can often be quite a bit more expensive, although you can certainly find some that are reasonably priced. They are also much less prone to developing leaks, and when they do they are quite easy to repair as well.

Continue Reading

Tags: , , , , ,
Posted in Services | Comments Off on Compression vs. Cartridge Faucets

Clogged Kitchen Sink? What Should You Do

Wednesday, February 16th, 2011

Clogs are common in almost every household and place of business. Even if you take special care not to put anything that might cause a clog down the drain, there is a good chance that excess bits of food, grease, hair, or other unsavoury materials and pieces will eventually line and clog your pipes. So, what should you do when a clog takes over your kitchen sink? Here are a few simple steps for quick removal.

1.       Disconnect Your Garbage Disposal – Before you do anything, you will need to disconnect the disposal from the sink so you have access to the drain. Start by unplugging your disposal – never work on your sink or the garbage disposal with it plugged in. If the disposal itself is clogged, turn the blades manually to work free any clogs. If it turns freely, the clog might be past the disposal in the pipes and it will need to be removed for further cleaning. Most of the time, however, the clog will be either in the disposal or in the opposite sink.

2.       Plunging Your Sink – Once you have ruled out the disposal, it is time to plunge the sink. Make sure to clamp off the line from your dishwasher so that you do not push any water back into the machine. If you have two sink drains, make sure to seal up the one you are not plunging so that a good seal is created. Do NOT plunge the sink if you have poured any chemicals down in an attempt to clear the drains.

3.       Cleaning Out the Trap – If a plunger cannot get the job done, it is time to check the P-trap. To do this, remove as much water as possible from the sink and place a bucket under the trap so you do not make too big of a mess. Now, disconnect the p-trap from the trap arm. If you have an older metal sink assembly, you may need a wrench or pliers to get the Slip Nuts free. Plastic is much easier. Check the trap to see if there is a clog in the curve of the joint. If not, you will need to move on to the final possible fix.

4.       Snaking – If you cannot clear the clog with a plunger and your hands, it may be time for a snake. You can rent one from most hardware stores if you do not own one, and it is a lot cheaper than calling a plumber to do it for you. You will need to remove the trap arm from the drain itself and then run the snake down the line until you find the clog. This can be a time consuming process, but most often it will take care of any remaining clogs.

Continue Reading

Tags: , , , ,
Posted in Services | Comments Off on Clogged Kitchen Sink? What Should You Do

Bathtub Drain Plumbing: Things You Should Know

Tuesday, February 15th, 2011

When we think of clogged drains and plumbing problems, we most frequently think of toilets and kitchen sinks, but one of the most common drains to cause problems in a home is the bathtub. To avoid drain problems and to help fix any problems that might crop up, here are some tips for how to handle your finicky bathtub drain.

  • How the Bathtub Drain Works – A Bath tub drain works the same as the other drains in your home with a simple trap that ensures the safe transfer of water out of your home and blockage of sewer gasses from getting into your home. The drain itself is frequently open with a small crack – roughly a quarter inch – beneath a larger drain plug that can be lowered when you fill the tub. While the space is not large enough for objects like a bar of soap to enter, it is plenty large enough for hair, soap scum, and other small objects from a bath or shower to enter and start clogging that trap.
  • Cleaning the Drain – To cut down on how much hair and gunk actually gets into the drain you should take off the entire drain mechanism once a week and remove any excess hair. You should also use some form of wire device like a bent coat hanger or scrubber to reach in and remove any hair you can reach. There are specific plumbing devices to help with this as well, but a hanger works just fine assuming you do not have a heavy clog. It is also a good idea to run boiling water through your drain once every week to clear out any soap and hair build up. While most soap is water soluble, it can create a thick, greasy clog when combined with hair. Hot water can help to remove it before a clog occurs.
  • If a Clog Occurs – If a clog does occur, you should use the hot water method along with a plunger to try and clear out as much of the clog as possible. Avoid chemical use at all costs. Bathrooms are usually small rooms and even with the fan on, the fumes can be dangerous and the chemicals caustic on your pipes and tub. Baking soda and vinegar often help for small clogs, but otherwise, you should move on to a snake for physical clog removal.

If you have a clog deeper than the snake can reach or that you simply cannot affect with the tools listed above, it may be necessary to call a professional who can track your clog into the pipes and find where the root of the problem is. It might be just too deep in your drainage pipe or it could be a completely different area of your plumbing system.

Continue Reading

Tags: , , , ,
Posted in Services | Comments Off on Bathtub Drain Plumbing: Things You Should Know

Why Is There a Sewer Smell in Our House?

Friday, February 11th, 2011

Detecting a sewer smell in your house is never pleasant on a number of levels. Of course, the main thing you are most likely concerned about is that the smell makes it hard to be in your house. After all, who wants to live in a place that smells like a sewer?

But there are other reasons to be concerned when you smell something like this as well. For one thing, since this is not the way that your house should smell, it likely means that there is a problem somewhere in your sewer, drainage or venting system. Also, gasses that generate that sewer smell can be made up of methane and hydrogen sulfide, both of which are quite dangerous and not the types of gasses you want your family to be breathing on a regular basis.

In most cases, you will need to call in a professional to determine the exact cause of the sewer smell and eliminate it. This can sometimes be expensive if the problem is widespread or difficult to locate, but it does not have to be. Some causes of a sewer smell in your house are relatively easy to remedy, particularly for an experienced professional.

For instance, the smell may be the result of leaks in certain pipes and can be eliminated when those leaks are repaired. Or a low water level in your toilet could be the culprit. The constant presence of water in your toilet bowl is actually what keeps those sewer gasses from seeping up and into your house. So if the water level in the toilet bowl drops for some reason, the gasses can be allowed to escape into your house. This is especially likely if you have a toilet that does not get used often and where the water may have evaporated over time.

Another common reason that a sewer smell can develop in your house is that the vent pipe has become clogged. Since it is the job of this pipe to vent sewer gasses out of your home, it is not surprising that a blockage in this system could cause the odors to build up inside. Depending on your skill level, you may be able to tackle the project of unclogging the vent pipe on your own or you may need to call in a professional plumber to get the job done.

Continue Reading

Tags: , , , , ,
Posted in Services | Comments Off on Why Is There a Sewer Smell in Our House?

Bathtub Drain Plumbing: Things You Should Know

Wednesday, February 9th, 2011

When we think of clogged drains and plumbing problems, we most frequently think of toilets and kitchen sinks, but one of the most common drains to cause problems in a home is the bathtub. To avoid drain problems and to help fix any problems that might crop up, here are some tips for how to handle your finicky bathtub drain.

  • How the Bathtub Drain Works – A Bath tub drain works the same as the other drains in your home with a simple trap that ensures the safe transfer of water out of your home and blockage of sewer gasses from getting into your home. The drain itself is frequently open with a small crack – roughly a quarter inch – beneath a larger drain plug that can be lowered when you fill the tub. While the space is not large enough for objects like a bar of soap to enter, it is plenty large enough for hair, soap scum, and other small objects from a bath or shower to enter and start clogging that trap.
  • Cleaning the Drain – To cut down on how much hair and gunk actually gets into the drain you should take off the entire drain mechanism once a week and remove any excess hair. You should also use some form of wire device like a bent coat hanger or scrubber to reach in and remove any hair you can reach. There are specific plumbing devices to help with this as well, but a hanger works just fine assuming you do not have a heavy clog. It is also a good idea to run boiling water through your drain once every week to clear out any soap and hair build up. While most soap is water soluble, it can create a thick, greasy clog when combined with hair. Hot water can help to remove it before a clog occurs.
  • If a Clog Occurs – If a clog does occur, you should use the hot water method along with a plunger to try and clear out as much of the clog as possible. Avoid chemical use at all costs. Bathrooms are usually small rooms and even with the fan on, the fumes can be dangerous and the chemicals caustic on your pipes and tub. Baking soda and vinegar often help for small clogs, but otherwise, you should move on to a snake for physical clog removal.

If you have a clog deeper than the snake can reach or that you simply cannot affect with the tools listed above, it may be necessary to call a professional who can track your clog into the pipes and find where the root of the problem is. It might be just too deep in your drainage pipe or it could be a completely different area of your plumbing system.

Continue Reading

Tags: , , , , ,
Posted in Services | Comments Off on Bathtub Drain Plumbing: Things You Should Know

Why Does My Garbage Disposal Leak, Grind Poorly and Make a Lot of Noise?

Monday, February 7th, 2011

It is definitely convenient to have a garbage disposal in your kitchen. They make doing the dishes and getting rid of food waste much easier. But just like any other appliance or piece of equipment in your home, your garbage disposal can sometimes develop a problem that causes it to leak or perform inadequately.

Leaky garbage disposals are certainly no fun to deal with. There are several reasons why garbage disposals can develop a leak. There could be an inadequate amount of putty or sealant at the joint where the garbage disposal connects to the drain pipe from the sink. A leak can also spring from that area simply because the bolts holding the two pieces together are not securely tightened.
The point where food and waste exit the garbage disposal and move into the main drainage system is another spot prone to developing leaks. These types of leaks are similar to those that occur between sink drain and garbage disposal and can be remedied in the same way.

In general, the key to dealing with a garbage disposal leak is to locate the source. This will most often be where two pipes come together or where the pipes join the unit. However, as your garbage disposal ages, it is more prone to developing cracks in the body of the unit itself. When this happens, leaks can develop anywhere there is a seam or break in the body of the garbage disposal itself. With this type of leak, the only thing to do is to replace the garbage disposal with a new one.

Leaks are not the only problems that can develop in a garbage disposal either. Sometimes you may notice that your garbage disposal is making an unusual amount of noise when it is turned on. This is often the result of something getting in there that should not have, so you should not continue to run your garbage disposal. Turn off all power to the unit and see if you can reach or see into the garbage disposal to determine what is causing the problem.

If your garbage disposal is not grinding well even though it seems to be rotating fine, you may not be running enough water into it when it is turned on. The water is necessary to facilitate the grinding process, so be sure to keep it going at all times. If that does not solve the problem, you may need to have a professional come out and take a look at your system to find out what is going on.

Continue Reading

Tags: , , , , ,
Posted in Services | Comments Off on Why Does My Garbage Disposal Leak, Grind Poorly and Make a Lot of Noise?