Saddleback Plumbing Heating & Air Blog: Posts Tagged ‘Westminster’

New Fixtures in Newport Beach: A Low Cost Way to Brighten a Kitchen or Bath

Monday, April 23rd, 2012

Many older homes in Newport Beach still have the original faucets, toilets, shower heads, and other plumbing fixtures and are in desperate need of plumbing replacements. Like most contractor-grade components, those fixtures were  probably designed to be strictly practical, with very little styling or decorative flair.

Contractors aren’t architects or interior designers. They’re focused mainly on installing the infrastructure of the plumbing system – the water delivery and waste pipes. It’s not their job to pick out elegant or cutting edge fixtures. They also can’t predict the taste of a home’s future occupants, so it makes no sense to install distinctive fixtures that might be removed or, worse, contribute to a potential buyer’s negative impression of the home.

That means many homeowners spend years living with plumbing fixtures deliberately intended to be bland and unnoticeable. There’s nothing wrong with that, but consider how many times each day we use our bathroom and kitchen plumbing. How many times per week do we take a bath or use the shower? The simple pleasure of seeing and touching an attractive, well designed faucet is a little perk that can help brighten the day.

Higher end plumbing fixtures can be pricey, but factor in how long most fixtures last and you’re only paying a few pennies or less per day. Plumbing fixture design has become much more consumer-driven. Companies must compete by offering an expanding variety of styles.  The new passion for cooking has increased the demand for professional grade kitchen faucets that can stand up to hard use, have pullout sprayers, and accommodate large pans. New shower head designs provide a more comfortable, invigorating spray. Sink faucets with elegant finishes of bronze, brushed nickel, or brilliant brass can liven a bathroom. Ergonomically correct handles are easier to use and more inviting to touch.

There are also practical reasons for replacing fixtures. With improvements in materials technology the interior seals of faucets and other fixtures are more resistant to mineral build up and corrosion that can cause leaks. Metal finishes are more durable and resistant to dulling from soap or detergent.

Installing a new, attractive faucet won’t provide a total kitchen or bathroom makeover, but it will provide a spark that brightens the room and makes everyday living just a little more fun.  Call Saddleback Plumbing to get started today.

Continue Reading

Tags: , ,
Posted in Services | Comments Off on New Fixtures in Newport Beach: A Low Cost Way to Brighten a Kitchen or Bath

Corona Del Mar Heat Pump FAQ: Why is Steam Rising from the Outdoor Unit of my Heat Pump?

Wednesday, March 28th, 2012

In the winter months, we often get calls from Corona Del Mar customers about steam rising from the outdoor unit of their heat pumps, which is often mistaken for smoke. Steam rising from your outdoor unit is a normal during the heat pump defrost cycle. The defrost cycle prevents ice from accumulating on the outdoor coils.

Under normal conditions, heat pumps in Corona Del Mar should run without needing a defrost cycle. However, if temperatures drop to near freezing, a sensor will set off the defrost cycle, during which the outdoor coils will heat up and melt any ice that has formed on the coils. During this cycle, you may see what can look like puffs of smoke, but it’s actually the steam caused by the coils melting the frost. The steam can appear to be denser if there’s excessive humidity or moisture in the air.

It is important to note that the defrost cycle should not last more than ten to fifteen minutes, and each cycle should only run every two hours or so. If you notice that the cycles last longer, run more often, or if you see ice on the outdoor coils of your heat pump after the cycle is finished, you may need a heat pump repairs. Another concern is cooler temperatures in your home, which could indicate that the heat strips are not working properly during the defrost cycle.

Once the cycle is finished, the fan motor should come on again, but if it doesn’t come on several hours after the cycle, you should call us to send one of our HVAC technicians to inspect your heat pump. There could be an issue with airflow, or a potential motor failure. When there’s a lack of adequate airflow, it can damage the compressor and other components. Call us any time you notice anything other than the normal steam rising from your heat pump during the winter.

There are some ways to prevent excess wear and tear on your heat pump during the winter. For instance, strong winds can greatly affect the performance of your heat pump and may cause abnormal defrost cycles. Make sure the outdoor components are protected from heavy wind by placing some type of natural or manufactured barrier around your heat pump, but be sure not to block the airflow. If you are buying a new heat pump, look for a model that has demand-defrost control. This feature helps to save energy by minimizing the defrost cycles.

Feel free to call Saddleback Plumbing if you have questions about your heat pump or Corona Del Mar heating.

Continue Reading

Tags: , ,
Posted in Services | Comments Off on Corona Del Mar Heat Pump FAQ: Why is Steam Rising from the Outdoor Unit of my Heat Pump?

When Should You Check Your AC Filters non a Regular Basis

Friday, February 3rd, 2012

In Orange County the filters on your air conditioning unit are vital for keeping out the dust and debris that make things like illness, allergies and air quality worse. And it’s important that you take personal responsibility for checking those filters. Sure, you have a professional visit your home once a year to check the air conditioning, but you should also check the indoor air quality yourself on a semi-regular basis for possible filter degradation.

Monthly Checks

So, how often should you check? Think of it this way. There is no such thing as checking too much, but you can easily not check often enough. So, we recommend checking your filter at least once every 4 weeks. It may not always need to be changed during that four week checkup (sometimes it can last 6 weeks or longer), but it’s good to take a peek.

Why is this so important? Because filters that haven’t been checked and changed as needed have a habit of building up excess sediment and debris. Not a problem when it comes to actually working, but a huge problem when it comes to your energy bill. The harder a system has to work to keep you house cool, the more energy it draws and the more you pay to have cool air in your home. And it will break down much faster as a result of overwork and dirty filters.

Changing an AC Filter

If your filter is ready for a swap, here are some quick tips to get the job done:

  • Find Your Filters – If you don’t know where your filters are, ask your contractor on the next visit or look near the return grills by the thermostat.
  • Remove the Filters – Open the latches and pull the old filter out to check it. You should be able to see clearly through a permanent filter and a disposable one should still be white. If this isn’t the case, it’s time for a cleaning/replacement.
  • Clean the Area – Clear the grill and area of any debris and sediment that might make the filter worse after replacement.

Proper filter maintenance only takes five minutes and it will save you money every month you run your AC – not a bad deal for a few minutes’ work.

Continue Reading

Tags: , ,
Posted in Services | Comments Off on When Should You Check Your AC Filters non a Regular Basis

Woodbridge Heating Guide: Furnace Fan Limit Switch

Friday, January 13th, 2012

When researching your Woodbridge furnace and potential problems it might have, you’ve probably run across a few references to the fan limit switch. And while you know that it can break in a number of ways, do you know what the switch does and what you should look for when checking your furnace its air handler for problems?

What the Limit Switch Does

To put it very simply, the furnace fan limit switch is a control that tells your furnace’s fan when to turn on and off. So, when the furnace isn’t on, it tells the blower not to operate (and send cold air into your home) and when the furnace is on, it tells the blower to turn on and start circulating the warm air.

While the primary function of the limit switch is to turn the blower fan on and off, it also has a safety role. When the temperature in the air supply plenum gets too hot, the limit switch turns off the furnace boiler to keep there from being any damage from overheating. This is handy if there is a blockage in the air vents or the controls are messed up due to water damage or improper adjustments to the settings.

Looking for Problems

Most of the time, when there is an issue with your furnace turning off or on frequently, the limit switch is one of the first things you will check. Because the switch is electronic and is attached to a thermostat which measures temperature in the air supply plenum, a small problem can result in it not working properly. So, you can easily check it by temporarily bypassing the switch and seeing if your device turns on or off properly.

In many cases, if the limit switch is the problem, you will still need to call a Woodbridge professional for replacement, but you can avoid a lot of headaches related to tracking down the source of the problem. If you suspect a limit switch problem, make sure to call someone immediately, because it does provide an important safety function and because without it your furnace won’t cycle on and off properly.

Continue Reading

Tags: , , , , , ,
Posted in Services | Comments Off on Woodbridge Heating Guide: Furnace Fan Limit Switch

Steps to Take Before Turning on Your Furnace: A Guide from Aliso Viejo

Friday, November 4th, 2011

You are feeling a chill in the air in Aliso Viejo. The outside temperatures are going down each day and the nighttime temperatures are forcing you to break out the flannel pajamas, robes, and blankets. It’s getting cooler and you are holding off turning on your furnace for the first time of the season, maybe because you envision high utility bills or you are afraid of what you’ll hear, feel, or see coming from your furnace after several months of inactivity.

There’s not much you can do to control higher utility bills, they are like death and taxes. But there are some things you can do to take the “mechanical anxiety” out of turning on your furnace for the first time.

You can’t go back in time but you may want to consider “summerizing” your furnace after you shut it down in preparation for the cooling season – or during the cooling season. Have a qualified heating and cooling technician give your furnace an inspection and cleaning.

A preseason inspection and cleaning will prevent some problems that may affect some of your senses later on. For example, a smell coming from your furnace may indicate a burning or smoldering electrical component. A noise may indicate a noisy fan or a loose belt, causing poor or no airflow. Touching your ventilation system and feeling for any vibration can indicate poor airflow. Visually checking your instruments like thermostats for verifying proper temperatures or a digital readout on our carbon monoxide alarm for any traces of harmful gas are also important to furnace start-up.

If something goes wrong, don’t blame it on your thermostat or the cold weather; blame it on a lack of preventive maintenance. Your best bet is to have a qualified service technician do a clean and inspection – to minimize any surprises at start-up and to keep you and the occupants of your home comfortable and safe while your furnace begins another season of hard work.

Continue Reading

Tags: , , , , , ,
Posted in Services | Comments Off on Steps to Take Before Turning on Your Furnace: A Guide from Aliso Viejo

Some Pointers From Westminster: Home Energy Myths

Friday, October 7th, 2011

Measuring and controlling your Westminster home’s energy consumption is a little tricky. There are plenty of talking heads and information resources on the Internet that tell you how it’s supposed to work, but in most cases you’ll find that so called common knowledge about your home’s energy use isn’t always true. Here are some of the most common myths and how to differentiate from the truth.

  1. Conservation and Efficiency Are Different – Many people think that by getting an energy efficient appliance, they are conserving energy and helping the environment. To some degree this is true. However, in reality, you are merely reducing how much energy it takes to complete a task. Conservation is finding ways to actually stop using energy for common tasks. Taking baths instead of showers, not watering your lawn, and turning off lights completely are all examples of conservation.
  2. Turning Off an Appliance Saves a Lot of Energy – Regardless of whether an appliance is physically on or not, it still consumes power as long as it is plugged in. The only way to completely stop your energy consumption is to unplug an item completely or use a power strip that blocks access to electricity when the switch is turned to off.
  3. Turning on Items Creates a Power Surge – While turning a computer on and off uses a bit more electricity than simply leaving it on all the time, it isn’t a significant difference. In fact, the longer you leave an appliance on, the more it wears down and the faster it starts to use extra power to remain effective.
  4. One Energy Source is Cheaper than Another – This depends largely on the type of energy source you have for heating and cooling, the cost of that source and how much heating and cooling you need. A single portable electric heater is cheaper than running your entire oil heating system. But, electric heaters are rarely cheaper if you use them to heat your entire home.

Myths abound when it comes to energy use around your home. Make sure to get all the facts before making decisions that could end up costing you more money in the long run.

Continue Reading

Tags: , , ,
Posted in Services | Comments Off on Some Pointers From Westminster: Home Energy Myths

Common Problem Areas for HVAC Systems in Westminster

Friday, September 2nd, 2011

No one wants to have to call a contractor in to inspect the HVAC system in their Westminster home. Problems in heating or air conditioning tend to be costly and time consuming to fix. But, the longer you wait, the bigger the problem is likely to get. So, it’s important to act quickly when you suspect a problem with any of the following common sources in an HVAC system:

  • Power Lines – Your HVAC system uses a lot of electricity so if it stops working, turns off suddenly or frequently shuts down, it may be a power issue. If the system stops working at any point, check your breaker box for a blown fuse or tripped breaker. You should also check the electrical line to your HVAC system. If you see any damage from animals, weather or otherwise, call a professional immediately.
  • Gas Lines – if you have gas furnaces and appliances, gas supply problems can be a major issue for your HVAC system. There are a number of safety measures in place in a gas line system. The gas valve connecting the gas line to your furnace has as safety shutoff switch. Your home has a carbon monoxide detector. A pressure drop in the system will also cause a shutoff. So, the most common problem you would face with a gas line is that is stops providing gas, usually because there is a problem in a component. If this happens, call the gas company immediately to check your system, and of course if you smell a leak, leave the house and call the emergency line for your gas company.
  • Drains – Air conditioners have drain pipes that release the condensed water that builds up inside as they run. However, over time, that drain can clog up if it’s not properly maintained. If you have a central air conditioning unit, check the drain pan once every week or so to make sure it is draining properly. Frequently, this drain pipe will be located higher in your home so that it can drain properly away from the property. Call a professional if it continues to clog or fails to drain at all.
  • Venting – Vent problems can result in more than just stuffy air. Clogged or dirty vents are fire hazards and they can decrease indoor air quality, making it both uncomfortable and unhealthy inside. Vents and ductwork should be cleaned annually to avoid the buildup of debris and sediment. Additionally, you should do a visual inspection once a month to check for debris and vacuum the space where possible.

Most of the problems commonly associated with your HVAC system need to be checked and repaired by a professional. However, by remaining vigilant and checking them regularly, you can avoid a much bigger problem and subsequent repairs.

Continue Reading

Tags: , , , ,
Posted in Services | Comments Off on Common Problem Areas for HVAC Systems in Westminster

Question From Coto de Caza: Why is Ice in Central Air Conditioning a Problem?

Friday, August 12th, 2011

If your Coto de Caza air conditioner does not seem to be working as well as it should,  your natural first reaction is to go out and take a look at the compressor to see if there is anything you can do quickly to correct the problem. Of course, you cannot assess the situation unless you know what you are looking for. For instance, if you see ice forming on the condenser coil or anywhere else on the air conditioning system, you will know you found the likely source of the problem.

Ice can form in your air conditioner for a number of reasons. The most common one is that your refrigerant levels are low. Since this refrigerant is contained in a closed system, a deficiency in refrigerant means that there must be a leak somewhere in that system. Only a certified professional can refill your refrigerant and determine where the leaks are in the system to make the necessary repairs.

Another reason that ice can develop in your air conditioner is because the air is not flowing fast enough through the system and across the coils. This can happen because of a problem with the fan or because there is an actual physical impediment to the air flow. Regardless of the reason, the ice will form because without adequate air flow the condenser coils will get too cold.

These coils are typically kept just above freezing by the constant flow of air across them. When the air passes by them at this temperature, the moisture from the air condenses on the surface of the coil. But because the coil is not quite freezing, the water then runs down into a collection pan. When the coil is too cold, however, the moisture from the air will freeze on the coil before it can run off.

This ice actually manages to insulate the coil and keeps it from properly cooling the air or removing any additional moisture. If left unattended, the ice in your central air conditioning system can cause real damage to the unit. Plus, it is not allowing the air conditioner to do its job and cool your house down. So if you notice any amount of ice at all beginning to form on any part of your air conditioner, be sure to call for professional service right away.

Continue Reading

Tags: , , , ,
Posted in Services | Comments Off on Question From Coto de Caza: Why is Ice in Central Air Conditioning a Problem?

The Advantages of an Air Conditioning System in Aliso Viejo

Monday, August 1st, 2011

Just about everyone knows that air conditioning systems keep your indoor environment cool and comfortable during the hot summer months, which is very important when you live in a place like Aliso Viejo. While this may be enough of a benefit for you, there are also some other benefits to having a central air conditioning system installed in your house as well.

For instance, if you have someone in your household who is more susceptible to extreme temperatures than most people, an air conditioning system can actually help improve their overall health. Babies certainly fall into this category, as they have more difficulty than older children or adults do controlling their body temperature.

Also, many elderly people or people suffering from certain medical conditions, particularly heart conditions, are especially sensitive to the heat. If they are unable to stay cool, it can be very dangerous and damaging to their health, and an air conditioning system helps to guarantee that they will be able to stay cool and comfortable even on the hottest days of the year.

Aside from direct health concerns, air conditioning systems can also help to alleviate the symptoms of colds and allergies. They do this by controlling the level of humidity inside your home. If the air in your house is too moist or too dry, it can exacerbate cold and allergy symptoms, as well as dry out skin and make the indoor environment generally uncomfortable.

Proper humidity control is also important because it helps to ensure that any air filtration or purification system you have in place is able to operate at peak efficiency. Many of these units have a hard time extracting particulate contaminants from the indoor air that circulates through them if that air is too humid or too dry. With a state of the art air conditioning system in place, however, you will not have to worry about whether or not the humidity level in your home is out of balance.

It is also worth noting that a central air conditioning system can be preferable to a window mounted unit because it provides for a more even distribution of cool air throughout the house. Also, when you have a central air conditioning system, the condenser which is the source of most of the noise and vibrations that air conditioners make will be located outside and out of earshot. With window mounted units, on the other hand, there is really no way to block out or diminish the noise.

Continue Reading

Tags: , , , ,
Posted in Services | Comments Off on The Advantages of an Air Conditioning System in Aliso Viejo

How to Improve Your Indoor Air Quality

Wednesday, June 22nd, 2011

When we think of air pollution we often think of outdoor “smog”, but the air in your home or office may also be polluted, even if it looks clean. Sources of indoor pollution include

  • Mold
  • Pollen
  • Cigarette smoke
  • Household cleaners
  • Household décor and furnishings (like rugs and paint)
  • Household pesticides (like rodent or ant-killers, or plant sprays)
  • Radon
  • Carbon monoxide
  • Building materials (like asbestos and lead)

Indoor air quality is of particular concern in newer, better-insulated homes, or in older homes that have been recently weatherized. The “tightness” of modern houses means that any pollutants that get into the home stay there – and perhaps even increase in concentration over time if the source of the pollution is inside the house.

Indoor air quality problems can cause discomfort and even serious disease, especially in children. The good news, though, is that there are many effective ways to improve indoor air quality.

There are three basic strategies for improving indoor air quality:

  • Air purification. Air cleaners range from small tabletop models to full-house models that are part of the central heating and cooling system. Small air purifiers are typically not very useful, but central air filters can be very effective at removing airborne contaminants. If your heating and cooling system does not include central air filtration, you should consider an upgrade to a new system.

    It is important to note that air purification will not remove gases like carbon monoxide or radon from your home. Gas pollution must be remedied by professionals.

  • Ventilation. Many forced-air heating and cooling systems do not bring outdoor air into the home. Kitchen and bathroom exhaust fans and attic ventilation fans (when weather permits) can be very important in promoting the circulation of air. Also, opening windows is very important, especially when doing short-term activities such as painting that increase the number of pollutants in the air.

    You should also consider upgrading to one of the newer central heating and cooling systems that bring outdoor air into the home.

  • Source control. This is the most important indoor air quality strategy, and in many cases, the simplest one. Source control is definitely the most cost-effective strategy for improving indoor air quality, because purification and ventilation both require a constant use of energy.

    Switch to all-natural household cleaners, buy household furnishings made of natural fibers (instead of synthetic fibers that can “off-gas” volatile organic compounds). When painting, use VOC-free paint. Quit smoking, if you haven’t already.

    In some cases, source control must be done by a certified contractor. Asbestos should be sealed or enclosed (asbestos is not a hazard unless it is disturbed, at which point it can release a dangerous dust). Radon gas should be mitigated whenever possible by sealing cracks in the foundation where the gas enters, or by filtering the water supply if water is the source. Gas stoves can be adjusted to decrease the amount of emissions. Lead paint can be scraped off or covered with modern, lead-free paint (this is not a DIY job and requires EPA training).

    And, don’t forget to install a carbon monoxide detector in your home, ideally next to the sleeping areas.

Continue Reading

Tags: , , ,
Posted in Services | Comments Off on How to Improve Your Indoor Air Quality