Saddleback Plumbing Heating & Air Blog: Posts Tagged ‘Coto de Caza’

Common Questions about Heat Pumps

Wednesday, January 25th, 2012

Even if you installed a heat pump in your Trabuco Canyon home years ago, you may still have questions about the normal operation of your indoor and outdoor units. Here are answers to a few of the more common questions about heat pumps.

Do I need to schedule a heat pump maintenance visit before each season, or just once a year?

Scheduling a yearly maintenance visit is necessary to the proper upkeep and safe operation of your heat pump. This also extends the life of the system and helps it run more efficiently. However, scheduling a visit before the heating and cooling seasons isn’t necessary, unless you’ve had any concerns or issues with your heat pump.

Should I be concerned about the steam coming from my outdoor unit?

All heat pumps have a defrost cycle that melts the frost off of the outdoor coils in the winter. The steam rising from the outdoor unit results from the defrost cycle. If you notice that the defrost cycle lasts longer than ten to fifteen minutes, or if it cycles on and off frequently, you should call a service technician to look at your heat pump. There could be an issue with airflow that is affecting the compressor.

I just installed a heat pump. Why is my furnace running?

Many heat pump systems use the furnace fan blower to help distribute the heat throughout the house. Unless you’ve installed a geothermal heat pump, your furnace is most likely your backup heater, so it will kick on when the outside temperature drops below 20° F.

Is it really that important to clean my outdoor unit? It’s impossible to keep it clean all the time.

Yes, cleaning the outdoor unit is an especially important maintenance task. Not only does a routine cleaning of all the outdoor components maintain your heat pump’s efficiency and performance levels, it also prevents safety hazards. When you schedule a yearly maintenance visit with one of our technicians, cleaning the coils and outdoor unit is part of the service; however, if you want to clean the coils yourself, have one of our Trabuco Canyon technicians show you how to do this before you attempt it on your own. You could suffer from electric shock if you are not familiar with the proper cleaning procedure. You can also help by making sure that the debris is cleared from around the outdoor unit.

If you have any questions about the heat pump in your Trabuco Canyon home, or if you’d like to schedule a maintenance appointment, give Saddleback Plumbing a call any time.

Continue Reading

What is an Electric Furnace? A Question from Foothill Ranch

Wednesday, November 23rd, 2011

There are many types of furnaces available in Foothill Ranch that use a variety of energy sources to operate. Gas furnaces use natural or propane gas, boilers and radiators use water, heated by electricity. And then there are electric furnaces, which may have an advantage over other energy sources based on energy costs.

Simply put, electric furnaces function through the use of electricity. They do not require the use of any type of fuel – but function through wires and chords. An electric furnace uses heating coils, sometimes referred to as “resistance calrods” to create heat directly in the air flow. Inside the furnace cabinet are controls, a blower, and the circuit breakers for the heating elements. Some furnaces have the breakers accessible from the outside of the cabinet.

Other add-on accessories may include an electronic air cleaner, air filter, humidifier, high performance media filter, and air conditioning evaporator coil.

The heating process begins with the home’s thermostat. A drop in temperature is sensed by the thermostat, which alerts the electric furnace. The coil then warms up, thanks to the electric current that passes through it. The heated coil in turn heats the temperature of the air around it, which is then blown into the house through a blower. The pressure that is exerted by the blower on the heated air, warms it further. The blower is able to overcome the resistance of the duct work and replace unheated, colder air with the heated air. In most homes there are various return air ducts that are used to bring in the colder air to the furnace. This cold air travels through the furnace, through an air filter, the blower, and finally through the heat exchanger. After this it will then be pushed back into the house as warm air.

To maintain a supply of fresh air in the house, some furnaces also suck air from the atmosphere outside. After the air in the house reaches a particular temperature, the thermostat automatically shuts off the electric furnace.

An electric furnace may be less costly to run, depending on the price of electricity versus other sources like natural gas, propane gas, or oil. Gas and oil are fossil fuels and burning them leaves a “carbon footprint” – the release of carbon compounds and gases into the atmosphere. An electric furnace does not burn fuel and thus does not leave a carbon footprint. This electric warming process results in fewer particulates and contaminants in the air, too.

Continue Reading

Warning Signs of a Broken Furnace: Some Pointers from Coto de Caza

Wednesday, November 9th, 2011

How do you know when your furnace is “on the fritz?” There are warning signs of a broken furnace and some are recognizable – but not all. A broken furnace not only deprives your Coto de Caza home of heat and comfort, it also can be deadly, too.

Let’s look at some of the warning signs.

Each year, hundreds of people die and many more are injured from the most common household poison: carbon monoxide. This colorless and odorless poisonous gas comes from several sources and the furnace is the most common source of all; more precisely a broken or malfunctioning furnace. Carbon monoxide is a result of incomplete combustion of a fossil fuel, which is when a fuel does not burn correctly or completely. In a furnace, carbon monoxide gas comes from a poorly operating burner or a cracked heat exchanger. A properly tuned and maintained furnace greatly reduces the risk of carbon monoxide poisoning.

Since carbon monoxide gas is colorless and odorless, it can go undetected. It can make people sleepy and create flu-like symptoms. Sometimes a person may fall asleep and never wake up. But there are warning signs. Drowsiness, vomiting, or flu-like symptoms are a warning sign. Regularly scheduled maintenance of your furnace by a qualified heating and cooling professional and installation of carbon monoxide detectors can reduce the risk of falling ill to carbon monoxide gas.

Another warning sign is a higher energy bill. Sometimes you can’t detect a problem right away because, like carbon monoxide, there may be no obvious signs. Higher utility bills can be a sure sign of a furnace that is working too hard and running more than usual. This may be a result of clogged or dirty air vents, or dirty filters. If your monthly bills are higher than those of the previous year, it may not just be because gas prices are higher.

There are other warning signs of a broken furnace, too. The most obvious is the failure of your furnace to bring your home up to the desired thermostat settings or to maintain an even temperature. Cold or uncomfortable houses are sure signs of a broken furnace. The furnace may cycle on or off, causing an uneven or inconsistent flow of heated air. This can be because of a poor blower or a clogged furnace filter. If you don’t feel any moving heated air or detect any unusual odors or smells coming from your heating vents, that’s a sure sign of a broken or malfunctioning furnace.

A broken or cracked gas line can emit odors and can cause a furnace to malfunction, too.

Don’t take a chance of losing heat and comfort this winter. At the first possible warning sign, call your local heating professional for a heating system tune-up.

Continue Reading

Sources of Carbon Monoxide

Monday, October 24th, 2011

The risks of carbon monoxide have been well documented for years, and everyone in Coto de Caza knows how dangerous it can be. It can be fatal at high concentrations, but even in low levels it can be poisonous enough to make you sick.

What you may not know is that there are many sources of carbon monoxide, also known as CO. This poisonous gas is formed by any incomplete combustion process. Since combustion is not 100% efficient, that means carbon monoxide is released any time something burns.

To be more specific, here are some examples of carbon monoxide sources you might encounter around your house:

  • A furnace or chimney can leak exhaust gases, including CO, into the home if it has been improperly sealed or vented. For example, if the chimney has a small crack in the flue that goes unnoticed, CO from the fireplace can be vented back into the house.
  • A furnace supplied by an under-sized gas line will often burn the gas at a sub-optimum temperature. The result is incomplete combustion of the gas, which means a source of CO.
  • Old, dilapidated or poorly maintained heating systems are a big culprit. Often the seals or fittings are loose on these units, causing CO to leak out of them and into your house. Or they may not burn fuel as efficiently as they used to, so carbon monoxide is more readily released.
  • Using machinery, like a propane generator or a gas-powered saw, in a poorly vented garage can be very dangerous. Sometimes people don’t think about this one because the garage is large enough that it seems to be ventilated better than it is.
  • There’s a reason that barbeque grills are labeled for outdoor use only: they release a lot of carbon monoxide. Both charcoal and propane grills should only be used outdoors, and you should avoid the smoke from charcoal in particular as much as possible.
  • Smoking tobacco releases carbon monoxide into the air, along with other potentially dangerous gases.

There are plenty of other sources, as well, but those are some common ones. To protect yourself and your family, make sure any areas where combustion occurs are well-ventilated, keep your HVAC equipment well-maintained and in good repair and invest in a home CO detector. They are inexpensive, and many are combined with a smoke detector, so you only need to buy one unit.

Continue Reading

How Can I Be Sure My Home’s Air is Safe? A Question from Santa Ana

Monday, October 17th, 2011

There are many ways to ensure your Santa Ana home’s air is safe to breathe, but the easiest is to have it tested regularly and to use proper filtration and ventilation. However, there are a lot of different filtration methods, so here are a few known to work best.

Air Filtration

If you have pets or a lot of plants, air filters are a great idea because they remove most of the larger particles that get into our air supply. This includes things like pet dander, pollen, mold, and other particles like dust. If you have allergies or someone in your home has asthma of any kind, this is the best way to be sure they don’t breathe anything they shouldn’t.

Air filtration is also very simple to install and inexpensive to maintain. Just be sure you opt for HEPA air filters. They are the best on the market and are certified to capture much smaller particles than any other filters, plus they tend to last quite a bit longer.

Air Purification

For big time air cleaning, you want to go with an electronic air purifier. These machines will actually ionize the air in your home to separate out smaller particles such as gas, smoke, or pathogens like bacteria and viruses. They can also capture some larger particles like mold and dust mites. The key to effective air purification is to use it in conjunction with a good air filter.

Also, consider the use of a good UV filter with your air purifier. UV filtration can be installed in your air ducts or vents to kill any unwanted pathogens as the air is circulated.

Continue Reading

Choosing an Environmentally Friendly Refrigerant for Your Air Conditioner

Friday, September 9th, 2011

For years in La Habra, we heard about how bad air conditioners were for the environment. Specifically, the liquid used in them to remove heat from air in your home tended to eat holes in the Ozone layer. Today however, air conditioners (along with every other appliance or device that uses refrigerant) have been upgraded to work with newer, better chemicals.

R-22 Refrigerant

While R-22 refrigerant is still used in devices sold today, it is being gradually phased out. According to the Montreal Protocol, R-22 refrigerant will no longer be allowed in new devices as of January 1, 2020 in the United States (though it can be used to service existing devices via recycled or reused refrigerant). While the most environmentally damaging refrigerants such as HCFC-141b have been removed from the market, R-22 is still considered harmful to the environment if allowed to enter the atmosphere.

R-410A Refrigerant

So, if R-22 will soon not be permitted (and is not an environmentally friendly option), what is? Currently, the most common refrigerant used in new residential air conditioners is R-410A. After the Clean Air Act was passed, the EPA reviewed a number of refrigerants to determine which were the least damaging to the environment (and human health) and which could be used as alternatives to R-22. At the top of the list is R-410A, a blend of different HFCs that don’t deplete the ozone. Sometimes called Puron, Forane, or Genetron AZ-20, R-410A is a good choice if you’re having a new system installed.

Other Alternatives

Of course, because R-410A is a hydrofluorocarbon, it does contribute to global warming and therefore is a risk to the environment, albeit in a much smaller capacity than older refrigerants. Recently, the EPA approved the use of HFO-1234yf – a chemical that pollutes 99.7% less than the current refrigerant used in car air conditioners. Whether it will be used in homes and commercial spaces remains to be seen, but the technology is advancing rapidly, allowing us to stay cool without sacrificing our planet’s health and future to do so.

Another alternative is to invest in an evaporative cooling system rather than a traditional air conditioner. These systems use no HFCs at all and therefore have zero impact on the ozone layer or global warming (other than the electricity they consume). They also use 80% less energy than traditional air conditioners. If you live in a dry, low humidity climate they are a great option.

Continue Reading

Question From Coto de Caza: Why is Ice in Central Air Conditioning a Problem?

Friday, August 12th, 2011

If your Coto de Caza air conditioner does not seem to be working as well as it should,  your natural first reaction is to go out and take a look at the compressor to see if there is anything you can do quickly to correct the problem. Of course, you cannot assess the situation unless you know what you are looking for. For instance, if you see ice forming on the condenser coil or anywhere else on the air conditioning system, you will know you found the likely source of the problem.

Ice can form in your air conditioner for a number of reasons. The most common one is that your refrigerant levels are low. Since this refrigerant is contained in a closed system, a deficiency in refrigerant means that there must be a leak somewhere in that system. Only a certified professional can refill your refrigerant and determine where the leaks are in the system to make the necessary repairs.

Another reason that ice can develop in your air conditioner is because the air is not flowing fast enough through the system and across the coils. This can happen because of a problem with the fan or because there is an actual physical impediment to the air flow. Regardless of the reason, the ice will form because without adequate air flow the condenser coils will get too cold.

These coils are typically kept just above freezing by the constant flow of air across them. When the air passes by them at this temperature, the moisture from the air condenses on the surface of the coil. But because the coil is not quite freezing, the water then runs down into a collection pan. When the coil is too cold, however, the moisture from the air will freeze on the coil before it can run off.

This ice actually manages to insulate the coil and keeps it from properly cooling the air or removing any additional moisture. If left unattended, the ice in your central air conditioning system can cause real damage to the unit. Plus, it is not allowing the air conditioner to do its job and cool your house down. So if you notice any amount of ice at all beginning to form on any part of your air conditioner, be sure to call for professional service right away.

Continue Reading