Saddleback Plumbing Heating & Air Blog: Posts Tagged ‘energy savings’

The Beauty of Zone Heating: A Tip from Brea

Monday, November 7th, 2011

While it might not technically be a necessity, there are a lot of reasons why you might want to look into having a zone heating system installed in your Brea home. Whether you’ve been using the same home heating system for a long time or are looking to have a new one installed, there’s never a bad time to have a zone heating system put in.

Most people think that the only thing that affects their home heating and cooling bills is the energy efficiency of their furnace. However, that’s simply not always the case. Certainly, the more efficient your furnace or heat pump is, the lower your energy bills will be. But that doesn’t mean they’re as low as they could possibly be.

After all, if you don’t have a zone control system installed, you’re paying to heat your entire house every time you turn on the heat. Depending on the size of your house, that could mean you’re heating anywhere from two to 10 rooms or more that are unoccupied at the time. In fact, you could be paying to heat an entire empty wing of your home. And while you’ll pay less than you would if your heating system was less efficient, you’re still paying more than you need to.

With a zone control system, you can heat your home much more efficiently because you can control which areas of the house get the heat and which ones don’t. You can set multiple different temperatures for the different zones of your home, which allows you to keep the occupied areas warm while not forcing you to waste energy to heat unoccupied spaces.

Aside from the economic benefits of only heating the areas of your home that you need, zone control systems also can put an end to some of those contentious thermostat wars that go on in so many households. If the members of your household can never agree on what a comfortable temperature is, they can simply each set their own temperature for their own area of the house.

That way, everyone is happy and no one has to suffer uncomfortably. After all, you paid a lot for your state of the art home heating system. It’s only fitting that you should be able to get the most possible out of it.

Continue Reading

Why Choose a Programmable Thermostat? A Question From Shady Canyon

Friday, October 14th, 2011

There are many types of thermostats available for your Shady Canyon home, but which is the best for your particular needs? It depends largely on how often you are home, how many rooms you have and how people in your house use each of those rooms.

A programmable thermostat in particular is a great option because it allows home owners to control when and how much heat or cooling is introduced to their indoor air. Normal thermostats lack this level of control, largely because they are built as simple switches that flip on whenever your temperature gets too low or too high.

Situations for a Programmable Thermostat

When you leave your home every day, you have two options. Either set the heat and AC so you’ll be comfortable when you return, or turn them off completely and suffer through the first half hour or so when you get home that night.

If you choose the former, you’ll pay a lot more in energy bills to heat or cool an empty house. And if your humidity levels need controlling as well, this may be your only option. Those in the second camp are forced to endure uncomfortable temperatures right when they get home and want nothing more than to relax. Not much better.

That’s why so many homeowners are opting for programmable thermostats to overcome this issue. With a programmable model, you can actually tell your home’s comfort system when to turn on and off each day, depending on when people will be there. Imagine going on vacation for three or four days and coming home to a nice and toasty living room and a smaller heating bill to go with it. That’s the kind of control a programmable model offers.

Zone Control and Beyond

Some programmable thermostats even allow you to section your home off into zones and choose specific temperatures for different areas of the house. This allows a great deal more control over when and how your system will operate each day, depending on the individual comfort needs of your family.

If you’re making dinner and don’t want the heat blasting you while you’re standing over the stove, just set the kitchen temperature lower. And with a programmable thermostat, you can tell it to come back on an hour after you leave the kitchen so that it’s comfortable later when you need a glass of water.

Continue Reading

Some Pointers From Westminster: Home Energy Myths

Friday, October 7th, 2011

Measuring and controlling your Westminster home’s energy consumption is a little tricky. There are plenty of talking heads and information resources on the Internet that tell you how it’s supposed to work, but in most cases you’ll find that so called common knowledge about your home’s energy use isn’t always true. Here are some of the most common myths and how to differentiate from the truth.

  1. Conservation and Efficiency Are Different – Many people think that by getting an energy efficient appliance, they are conserving energy and helping the environment. To some degree this is true. However, in reality, you are merely reducing how much energy it takes to complete a task. Conservation is finding ways to actually stop using energy for common tasks. Taking baths instead of showers, not watering your lawn, and turning off lights completely are all examples of conservation.
  2. Turning Off an Appliance Saves a Lot of Energy – Regardless of whether an appliance is physically on or not, it still consumes power as long as it is plugged in. The only way to completely stop your energy consumption is to unplug an item completely or use a power strip that blocks access to electricity when the switch is turned to off.
  3. Turning on Items Creates a Power Surge – While turning a computer on and off uses a bit more electricity than simply leaving it on all the time, it isn’t a significant difference. In fact, the longer you leave an appliance on, the more it wears down and the faster it starts to use extra power to remain effective.
  4. One Energy Source is Cheaper than Another – This depends largely on the type of energy source you have for heating and cooling, the cost of that source and how much heating and cooling you need. A single portable electric heater is cheaper than running your entire oil heating system. But, electric heaters are rarely cheaper if you use them to heat your entire home.

Myths abound when it comes to energy use around your home. Make sure to get all the facts before making decisions that could end up costing you more money in the long run.

Continue Reading

The Energy Efficiency Rating of Central Air Conditioners: What Is it and Why Is it Important? A Question From Brea

Monday, September 26th, 2011

When you are shopping for a central air conditioning system in Brea, you will have to evaluate your options based on a number of different factors. For instance, you will need to decide which type of system is the best match for your home and for your particular cooling needs. It is also important to make sure that the central air conditioner you choose is the right size for the cooling load it will have to take on.

However, it is also very important to evaluate your central air conditioning options based on how energy efficient they are. This will have a great deal to do with how much you pay in terms of cooling costs each month, which makes it easy to see why you should take it into account before you make a purchase.

The energy efficiency of a central air conditioner is generally expressed as a seasonal energy efficiency rating, or SEER. The SEER numbers you will typically find on the latest air conditioning systems range from eight to 19.5 with the higher numbers signifying a more energy efficient model.

So it is pretty easy to figure out that a central air conditioner with a higher SEER will save you some money monthly because it will use less energy to get the same job done. But central air conditioners with high SEERs also typically have high price tags. So to determine how high of a SEER you need, you will need to know more exactly how much more money you will save as you move up in the rankings.

You can do this by comparing the SEER of the system you currently use with the new system you are considering and compare how much your current energy usage would cost you with each model. Basically, you want to pick a central air conditioner that will save you enough to offset the purchase price of the unit.

Continue Reading

How Do EER and SEER Work? A Question From La Habra

Wednesday, September 21st, 2011

If you’ve looked for a new air conditioner in La Habra recently, you probably noticed each unit comes with an EER or SEER rating. The former is for room air conditioners and the latter for central air conditioning units. In both cases, the number is a measure of how efficiently the system uses electricity. Effectively, if you buy a system with a high rating, you spend less on electricity. Of course, there are tradeoffs. The higher rated machines tend to cost much more, so as a homeowner, you’ll have to evaluate how much you can spend now and how long it will take to save money from that investment.

How EER and SEER Are Measured

These numbers are required by the government to tell you, the consumer, how many BTUs per hour the device can use for every watt of electricity drawn. The more BTUs a system can use, the better for your bill.

Let’s say you want to buy a 10,000 BTU system to cool your living room and dining room. A pretty standard number for a single room unit is 11, meaning the 10,000 BTU system would use about 900 watts per hour to run at full capacity. We figure this out by dividing the BTUs (10,000) by the watts (900).

There is a lot of math to do here, so many people simply look for a higher number within their price range. But, at what point is the upgrade really worth your extra money?

Choosing the Right Energy Efficiency Rating

The easiest way to describe this is to compare two similar devices with different EERs:

Air Conditioner 1 Air Conditioner 2
BTUs 12,000 12,000
EER 9 11
Watts 1333 1091
Price $300 $450

In this particular case, we can spend more for a device that is the same size but uses less electricity. The question then is whether that increased expenditure will pay off in the short term. Let’s assume each device would be operated for 10 hours per day for 30 days in a typical summer month. That’s 300 hours of operation. If the average cost per kWh in you are is $0.09, it will take 4 hours for the first air conditioner to consume 1 extra kilowatt of electricity equal to an additional $0.09. If your air conditioner runs for four months out of the year, we know that it will operate for a total of 1200 hours. That means:

[(1200 hrs x 242 watts) / (1000 watts/kw) ] x $0.09/kWh = $26

So, you save roughly $26 per year from that high efficiency unit. With a $150 price difference, you will break even after 6 years (though probably sooner if the price of electricity goes up).

Don’t forget, however, that central systems are a much more efficient option with SEERs of up to 16.5 and much larger BTU areas to cover. The savings there can add up very quickly. If you have any questions, contact your local air conditioning professional.

Continue Reading

Save by Caulking Crevices and Penetrations

Friday, March 4th, 2011

They are nothing to be ashamed of. Really, everyone has them. You know – those little cracks and crevices that you always mean to get around to caulking but just have not found the time for yet. But they are so small, they cannot possibly be causing that many problems, right?

Well, not exactly. In fact, any small space that can let air in or out of your house could be costing you money – and a considerable amount too. The truth is that, next to inadequate insulation, leaks and drafts are some of the biggest drains on your home heating and cooling system.

After all, you are paying to heat or cool the air inside your house in order to keep the indoor environment comfortable all year round. But you do not want to be paying more than you need to be. That is why you bought the high efficiency HVAC system in the first place. If you have lots of drafts and cracks in various places throughout your house, however, you are almost certainly spending more than necessary to keep your house comfortable.

And the solution is so simple. You do not need to go out and spend a ton of money on an even more expensive heating and cooling system. All you really need to do is make sure that your home is sealed up as well as possible. And that means sealing up all of the cracks.

Caulking is an extremely effective way of doing this, and it costs very little, particularly if you take on the job yourself. But even if you hire a professional, the amount that you have to pay out will be returned to you many times over in savings on your monthly heating and cooling bills. There simply is no substitute for sealing up your house tight when you are trying to save money on heating and cooling costs.

Continue Reading

Save with Maintenance on HVAC

Wednesday, March 2nd, 2011

You can never save too much money by making improvements and taking steps around the house. Of course, it is hard sometimes to see exactly where the money saving opportunities are. That’s because you expect to spend a certain amount on various types of services when you own a home. You know you are always going to have heating and cooling bills, for instance. But are they higher than they need to be?

For many people, the answer to that question is “yes.” And it is not because they use their home heating and cooling systems inappropriately or because they have the wrong equipment. It is simply because they neglect to get their HVAC systems the regular care and maintenance that would keep them running at peak effectiveness and energy efficiency.

When your HVAC system is new, it runs well and can be remarkably energy efficient. However, over time that energy efficiency will gradually deteriorate. This drop off in efficiency is often not obvious at first, but if you compare your energy bills from the year you got your system to bills for the same time of year and same usage five years later, you will probably notice that the bill has gone up quite a bit, and not just because energy prices have gone up.

You can do a lot to prevent this loss of energy efficiency, though, if you simply have a professional HVAC technician come out once a year and give your system a tune up. During this type of maintenance service, the technician will check over your entire system looking for worn out parts and buildup that could be interfering with your system’s performance.

They can clean out any areas of your HVAC equipment that require it and they will be able to make any necessary repairs at that time. Often, a technician performing this type of maintenance will be able to catch minor issues before they are able to develop into bigger problems. And while you still have to pay for the maintenance visit, the cost is much less than what you would pay for an emergency repair.

It also represents a substantial savings over what you would be paying on your energy bills every month without it. Regular HVAC maintenance can preserve the vast majority of your system’s energy efficiency loss over time, and it is never too late to start. Even if it has been several years since you had your system installed, you will still be able to get back the vast majority of your original energy efficiency by starting with regular maintenance now.

Continue Reading