949-829-0910
A heat pump in Dana Point is designed to provide steady, reliable heat in your home throughout the year. So, what do you do when your heat pump suddenly stops producing enough heat? The first step is to figure out why exactly your heat pump has stopped working properly. From there, you can take action to get it back on track.
Reasons Your Heat Pump Isn’t Producing Heat
There are a number of reasons a heat pump might stop producing enough heat. Here are some of the most common ones you’ll encounter:
- Too Cold Outside – A heat pump can only handle temperatures so low. Most heat pumps are rated for outside temperatures as low as 40 degrees F (though they work best at 50 degrees F and up). If the outside temperature gets below the 37 degree F mark, it’s likely the system won’t be able to produce enough heat. Remember, however, that you should have an emergency heat source. If it isn’t on but the outside temperature is below 37 degrees F, you may have a problem with the outdoor thermostat or emergency switch.
- Fans – The fans on your heat pump may not be working properly. Simply check this by increasing the thermostat setting on your heat pump. If the fan never comes on, there could be an electrical or mechanical problem in your fan.
- Thermostat Readings – A simple problem that can stall your heat pump is thermostat failure or calibration problems. Check the thermostat to see if it is working properly and if not, call a professional.
- Refrigerant – If the refrigerant gets low in your heat pump, you may need to have it recharged. This is a quick and relatively inexpensive process so call for professional assistance as soon as you notice the problem.
If your heat pump isn’t working properly, don’t wait for it to break completely or for the temperature outside to become unbearable. Contact Saddleback HVAC experts for help immediately and get your heat pump fixed before it’s too late. Even a seemingly simple problem can quickly turn into a major issue if it isn’t dealt with immediately.
