Saddleback Plumbing Heating & Air Blog: Archive for October, 2011

Happy Halloween!

Monday, October 31st, 2011

Happy Halloween! We hope you all have a great time trick or treating, going to a haunted house, or just dressing up! And don’t forget that Halloween means fall is definitely here; don’t wait to get started on your fall maintenance. Now is the time to rake up those leaves, seal up any leaks, and check your heating system. You’ll be glad you did later this winter!

Continue Reading

Happy Halloween Weekend! (and Surprising Sources of Indoor Air Pollution)

Friday, October 28th, 2011

Everyone from Saddleback wishes you a Happy Halloween Weekend! Have a spooky (but safe) time!

Our scary warning of the day is about indoor air pollution. Indoor air pollution is a major problem for millions of homeowners throughout the country each year, and some of them live in Fountain Valley. In fact, the EPA estimates upwards of 20 million households may have problems caused by mold, radon, humidity, exhaust or any number of other pollutant problems. However, not all of the indoor air pollutants out there are so obvious. Some are things you probably have in your home right now and don’t realize it. Here are some of the more surprising sources of indoor air pollution and what you can do about them:

  • Incense – Incense releases both carbon monoxide and benzene, two chemicals that are potentially harmful to human health. Cancer, skin irritation and asthma risks are all increased in people who spend a lot of time around incense.
  • Laser printers – Laser printers that use toner can release a number of harmful chemicals into the air. That toner is very fine and releases particles into the air that are equal to or in some cases worse than second hand cigarette smoke. If you have a laser printer, consider putting it in a well-ventilated, infrequently used space.
  • Kitchen Stove – If you have a gas stove, it releases Nitrogen Dioxide when on, an unsafe gas that is odorless and fills your home quickly. This gas is bad for respiration and can cause asthma attacks. To solve this problem, simply make sure you stove is ventilated properly when cooking.
  • Spackle – Old spackle – the kind used before the 1980s often contained asbestos which can still be there, waiting to be disturbed. Old asbestos, while not inherently dangerous, will become so if you start doing work in your home or if the spackle starts to wear away. To solve this problem either call an abatement firm or cover the offending wall with a new layer.
  • Drapes – Those drapes are filled with contaminants that cling there, especially if humidity is a problem in your home. Dust mites in particular are bad for your health and can cause asthma and other allergies. Blinds are better than drapes for this reason.

Your home is filled with potentially dangerous problems, but you can avoid them simply by taking care to ventilate, clear away unsafe products and keep things like drapes clean (or remove them). If you’re still concerned about your air quality, call an expert to investigate.

Continue Reading

What is Air Purification? A Question from Garden Grove

Wednesday, October 26th, 2011

The air around us is getting more and more polluted these days in Garden Grove, and people are trying to do more and more to combat it. Cars come with ratings like “ultra-low emission vehicle” and windmills generate power from moving air rather than burning coal. No doubt, these efforts help, but if you want to take an active role in improving the quality of air in your own home, consider an air purification system.

Simply put, air purification is the process of removing contaminants and pollutants from the air. There are a number of devices on the market that can purify the air in your home. While anyone can enjoy the benefits of cleaner air, they are of particular utility for people which suffer from asthma or allergies, or who live in areas with higher concentrations of outdoor air pollution.

There are three main kinds of air purifiers, categorized by the kind of technology they use:

  1. HEPA filtration
  2. Negative ion generation
  3. Electrostatic precipitation

HEPA filtration purifiers simply filter the air that passes through them using a sieve-like filter or series of filters. Depending on the efficiency of the device and the filter, some of these purifiers can trap not only solid and like particles, but also gases and odors. One advantage of this type of purifier is that the HEPA filters can last for years before they need to be changed.

Negative ion generation and electrostatic precipitation models are more complicated and technical because of the technology they use. Consult with a professional to choose which kind of technology is best for your needs, depending on the air quality problem you are experiencing. Some air purifiers can trap bacteria, viruses, fungi or chemicals, so there is bound to be one that will suit your needs.

After deciding on which type of technology you need, you will also have to choose whether you want a portable air purifier unit or a central system that covers the whole house. Obviously the former works well if you are only concerned about the air in a room or two, while the latter is better if you have chronic asthma or a more widespread air quality problem.

Continue Reading

Sources of Carbon Monoxide

Monday, October 24th, 2011

The risks of carbon monoxide have been well documented for years, and everyone in Coto de Caza knows how dangerous it can be. It can be fatal at high concentrations, but even in low levels it can be poisonous enough to make you sick.

What you may not know is that there are many sources of carbon monoxide, also known as CO. This poisonous gas is formed by any incomplete combustion process. Since combustion is not 100% efficient, that means carbon monoxide is released any time something burns.

To be more specific, here are some examples of carbon monoxide sources you might encounter around your house:

  • A furnace or chimney can leak exhaust gases, including CO, into the home if it has been improperly sealed or vented. For example, if the chimney has a small crack in the flue that goes unnoticed, CO from the fireplace can be vented back into the house.
  • A furnace supplied by an under-sized gas line will often burn the gas at a sub-optimum temperature. The result is incomplete combustion of the gas, which means a source of CO.
  • Old, dilapidated or poorly maintained heating systems are a big culprit. Often the seals or fittings are loose on these units, causing CO to leak out of them and into your house. Or they may not burn fuel as efficiently as they used to, so carbon monoxide is more readily released.
  • Using machinery, like a propane generator or a gas-powered saw, in a poorly vented garage can be very dangerous. Sometimes people don’t think about this one because the garage is large enough that it seems to be ventilated better than it is.
  • There’s a reason that barbeque grills are labeled for outdoor use only: they release a lot of carbon monoxide. Both charcoal and propane grills should only be used outdoors, and you should avoid the smoke from charcoal in particular as much as possible.
  • Smoking tobacco releases carbon monoxide into the air, along with other potentially dangerous gases.

There are plenty of other sources, as well, but those are some common ones. To protect yourself and your family, make sure any areas where combustion occurs are well-ventilated, keep your HVAC equipment well-maintained and in good repair and invest in a home CO detector. They are inexpensive, and many are combined with a smoke detector, so you only need to buy one unit.

Continue Reading

Where to Turn for Your Indoor Air Quality Concerns

Friday, October 21st, 2011

The quality of the air inside your Robinson Ranch home is incredibly important. It has a direct impact on the health and wellbeing of your family and in some cases can affect the cost of your heating and cooling. But with so many worries out there and so many people trying to offer advice, where do you turn when you need help? Here are some resources to help you if you’re worried about indoor air quality.

  • EPA Resources – The US Environmental Protection Agency provides a huge number of resources for homeowners and business leaders worried about indoor air quality. The EPA keeps a complete list of hotlines and clearinghouses to call depending on where you live as well as a list of state health department resources according to their 10 region breakdown of the country at http://www.epa.gov/iaq/whereyoulive.html.
  • Asthma Help – If you suffer from asthma and are looking for help from an expert to handle an attack or deal with conditions leading to your attacks the Asthma No Attacks hotline is available both online at www.noattacks.org or offline at 1-866-NO-ATTACKS. The Allergy and Asthma Network is also available at www.aanma.org and the American Lung Association has a number of useful resources for anyone concerned with their lung health at www.lungusa.org.
  • Radon Help – If you are concerned about radon in your home, Kansas State University operates a number of hotlines including 1-800-SOS-RADON for test kits and 1-800-55RADON for your radon related questions.
  • School Help – For school administrators and indoor air specialists, the American Association of School Administrators has a number of indoor air quality resources at www.aasa.org/iaq-resources.aspx.
  • ASHRAE – To learn more about the standards followed by contractors throughout the United States and recommended by the EPA, visit the ASHRAE website at www.ashrae.org – the American Society of Heating and Refrigerating and Air Conditioning Engineers is responsible for evaluating new technologies and determining best practices for ventilation and air quality control.

And of course, if you are interested in the state and local regulations that affect air quality in your area, visit the California Department of Public Health’s website.

Continue Reading

Allergens Affected by Indoor Air Quality Systems: A Guide from Saddleback Plumbing

Wednesday, October 19th, 2011

Indoor air quality devices are designed to capture and remove certain allergens from the air, but what exactly is being removed and how would those allergens affect your health if left to circulate in your Irvine home? Here is a quick rundown of common allergens found inside the average home and why you should have them removed:

  • Dust Mites – Dust mites develop in high humidity conditions – above 50%. This means that dehumidification (which can be done with an air conditioner) to a healthy range between 35-50% will keep them from developing and ensure your indoor air stays comfortable and safe. Dust mites are not dangerous but they can severely increase complications from asthma and other uncomfortable conditions.
  • Animal Dander – Dander from cats, dogs, birds and other furry or feathered creatures is a common allergen for millions of people. If you suspect dander as an allergy, go on vacation to a place without dander and see how it affects you or your loved ones.
  • Dust and Dirt – Dust is in every home and while it is a common irritant, it can inflame asthma or worsen allergies many times over.
  • Pollen – Pollen is a problem for anyone with seasonal allergies or hay fever. While medicine can help, proper sealing of your house and indoor air filtration can reduce the presence of pollen from clothing and animals.
  • Bacteria and Viruses – Bacteria can develop in the air from common colds, old food or outside contaminants. Use a UV light to remove these from your air handler or ductwork.
  • Smoke and Exhaust – Indoor/outdoor ventilation can allow in smoke and exhaust that irritates most lungs. To avoid this problem install an electronic air cleaner that can target particles in smoke.

Getting rid of allergens in the air is an important aspect of maintaining a clean and healthy household. Proper air cleaning, filtration and UV purification will reduce these allergens many times over. There are also some great tips on the Asthma and Allergy Foundation website for how to reduce the presence of those allergens to start with.19

Continue Reading

How Can I Be Sure My Home’s Air is Safe? A Question from Santa Ana

Monday, October 17th, 2011

There are many ways to ensure your Santa Ana home’s air is safe to breathe, but the easiest is to have it tested regularly and to use proper filtration and ventilation. However, there are a lot of different filtration methods, so here are a few known to work best.

Air Filtration

If you have pets or a lot of plants, air filters are a great idea because they remove most of the larger particles that get into our air supply. This includes things like pet dander, pollen, mold, and other particles like dust. If you have allergies or someone in your home has asthma of any kind, this is the best way to be sure they don’t breathe anything they shouldn’t.

Air filtration is also very simple to install and inexpensive to maintain. Just be sure you opt for HEPA air filters. They are the best on the market and are certified to capture much smaller particles than any other filters, plus they tend to last quite a bit longer.

Air Purification

For big time air cleaning, you want to go with an electronic air purifier. These machines will actually ionize the air in your home to separate out smaller particles such as gas, smoke, or pathogens like bacteria and viruses. They can also capture some larger particles like mold and dust mites. The key to effective air purification is to use it in conjunction with a good air filter.

Also, consider the use of a good UV filter with your air purifier. UV filtration can be installed in your air ducts or vents to kill any unwanted pathogens as the air is circulated.

Continue Reading

Why Choose a Programmable Thermostat? A Question From Shady Canyon

Friday, October 14th, 2011

There are many types of thermostats available for your Shady Canyon home, but which is the best for your particular needs? It depends largely on how often you are home, how many rooms you have and how people in your house use each of those rooms.

A programmable thermostat in particular is a great option because it allows home owners to control when and how much heat or cooling is introduced to their indoor air. Normal thermostats lack this level of control, largely because they are built as simple switches that flip on whenever your temperature gets too low or too high.

Situations for a Programmable Thermostat

When you leave your home every day, you have two options. Either set the heat and AC so you’ll be comfortable when you return, or turn them off completely and suffer through the first half hour or so when you get home that night.

If you choose the former, you’ll pay a lot more in energy bills to heat or cool an empty house. And if your humidity levels need controlling as well, this may be your only option. Those in the second camp are forced to endure uncomfortable temperatures right when they get home and want nothing more than to relax. Not much better.

That’s why so many homeowners are opting for programmable thermostats to overcome this issue. With a programmable model, you can actually tell your home’s comfort system when to turn on and off each day, depending on when people will be there. Imagine going on vacation for three or four days and coming home to a nice and toasty living room and a smaller heating bill to go with it. That’s the kind of control a programmable model offers.

Zone Control and Beyond

Some programmable thermostats even allow you to section your home off into zones and choose specific temperatures for different areas of the house. This allows a great deal more control over when and how your system will operate each day, depending on the individual comfort needs of your family.

If you’re making dinner and don’t want the heat blasting you while you’re standing over the stove, just set the kitchen temperature lower. And with a programmable thermostat, you can tell it to come back on an hour after you leave the kitchen so that it’s comfortable later when you need a glass of water.

Continue Reading

How Bad Is the Air in Your Home? Saddleback Plumbing Investigates

Wednesday, October 12th, 2011

Every day in Irvine you hear about another awful contaminant that can get into your home’s air supply. Radon gas. Carbon Monoxide. Nitrogen Dioxide. Smoke. Mold. The list gets longer with each passing year and many homeowners are understandably worried. However, before you run out and by the newest lineup of filters, purifiers, and UV lights, stop and think about just how bad your indoor air actually is.

When Was Your Home Built?

Homes built in the last 10-15 years tend to be well ventilated and may even have air quality systems already in place. It’s those built in the late 1970s and early 1980s that tend to have the worst ventilation (assuming they have not been updated since then).

This kind of poor ventilation can be dangerous, but usually only in that you have less fresh air and more indoor allergens and contaminants. Specifically, you’re most likely to suffer from things like pet dander, dust, pollen, and dirt in the air. On their own, these are not dangerous, but without fresh air to circulate them outside and ensure you get a steady, clean supply of air to breathe, they can make you ill.

How Bad Can It Get?

While it’s rare, some homes suffer from more advanced contaminations. The most common is mold. Mold grows primarily in dark, damp spaces. If your humidity levels get too high in the summer, the ductwork in your house is perfect for mold and it will blow the spores directly into your air, putting everyone at risk.

Outdoor contaminants can also make it into your indoor air. Things like exhaust and smoke, gas, radon, or other outdoor pollutants should be tested for when you setup a new indoor air quality system. There are filters and purifiers that will remove almost all of these contaminants, but they are not always required, so you should check before making a decision.

Ultimately, the odds are that your home suffers only from some stale, dusty air. But, it is very important to keep everything clean and test it regularly to make sure nothing worse develops. Poor air quality is about more than just comfort – it’s an honest health issue.

Continue Reading

Detecting Leaks with Your Water Meter in Costa Mesa

Monday, October 10th, 2011

When you notice a leak in your Costa Mesa home’s plumbing, you fix it right away, but what happens when you don’t notice a leak for days or even weeks? The damage it causes can have a profound impact on your water bill and the good repair of your home. To avoid hidden leaks – the ones that hide in your walls or your yard, keep a close eye on your water meter.

The Hidden Leaks

Obvious leaks are…well, they’re obvious. They pour water down the walls, leave puddles in your bathroom or create ponds in your backyard. Unfortunately, the majority of leaks are much less obvious. They result from small drips between pipe joints in your walls or a hairline fracture in your water main or drain pipes. They may not even appear where you can see them.

If this happens, it’s important to have a keen eye for the signs that a water leak has occurred. Specifically, look for jumps in your water meter readings.

Watching the Water Meter

Your water meter tracks every drop of water consumed by your family. To check for water loss, record the reading at the same time every day and watch how it changes. To be sure of a leak, you can turn off all the fixtures in your home and watch for the meter to move. If the meter moves despite the fact that no one in your home is consuming any water, it is likely a leak.

You can also compare your bills from one month to the next. If your bill rises suddenly, without any clear reason, check the meter readings and the rates. If the meter reading increased suddenly and the water rate did not, there might be a leak to blame. If that’s the case, call a professional to inspect your water lines immediately – what is hidden to you might be a relatively obvious, straightforward repair to someone else.

Continue Reading