Saddleback Plumbing Heating & Air Blog: Archive for January, 2012

Troubleshooting Thermostat Issues: Is it the Thermostat or Something Else?

Friday, January 6th, 2012

If your room temperature is too hot or cold, what is the first thing you check? Probably the thermostat. If you are a San Clemente homeowner, you probably have played around with the setting on a thermostat, much to the chagrin of other occupants who don’t share your same comfort level. And if you try and adjust a thermostat at work – well forget about it. Most companies now have locking thermostats or “false” ones that don’t actually connect to the heating and cooling system.

So if you have a temperature problem, is it really the thermostat that causes it? Maybe yes and maybe no. One physical characteristic to check is the location of the thermostat. If it is in a drafty hallway or near a heat source, it only reads the temperature for that area and other parts of the building are neglected. You will often find more than one thermostat in a home that is tied into more than one furnace or air conditioner.

The older more popular round thermostats are manually controlled and do not adjust to any conditions in your San Clemente home. They simply control the heating and cooling functions based on a human turning a dial. It’s as simple as that. So if you use this method to adjust the temperatures, blame yourself and not the thermostat. You might want to consider installing a digital, programmable thermostat.

With that in mind, let’s look at some typical ways to troubleshoot a thermostat.

  • Check the anticipator, which is a small metal tab on the front of the printed scale. Give it a light push in either direction. It may be stuck.
  • Clean the interior of the thermostat housing and clean the contacts (small metal plates)
  • Check loose wires or wires that may be corroded.
  • Read the thermostat manual (if not available, look online) for other tips such as ensuring there is voltage to the terminals.

If you have checked everything and the thermostat seems to be in working order, look for other things within the heating & cooling system. These include blocked or restricted registers and vents, leaks or cracks in ductwork, and dirty air handling filters.

Continue Reading

Tags: , , , , , ,
Posted in Services | Comments Off on Troubleshooting Thermostat Issues: Is it the Thermostat or Something Else?

Heating Maintenance Tip 1 : Did You Change that Furnace Filter?

Wednesday, January 4th, 2012

No matter what type of furnace you have in Silverado, it’s important to remember to change or clean the filter on a regular basis. This is a relatively straightforward process and doesn’t require a Silverado professional‘s help. However, if you’re not sure how to go about doing it, you can always have your heating technician demonstrate the process for you on their next regular maintenance visit.

Indeed, changing or cleaning out the furnace filter is an important part of regular furnace maintenance. However, it often needs to be done more than once a year. The specific amount of time that you can go between filter changes depends on many things, but typically it’s good to check on it once every three months or so.

If you have a lot of pets or if anyone in your family has severe allergies, it may be worth it to check and change the filter even more often. Check with the manufacturer to see what their recommendations are as well. Some high performance furnace filters can last up to six months or even a year, but you should still check on the filter periodically to make sure that too much hasn’t built up on it in between replacements or cleanings.

You’ll need to make sure you have the right type of filter to install as a replacement as well. You can get this information from the owner’s manual of your furnace, from the manufacturer or by taking out and examining the current filter in your furnace. Some furnaces also have filters that are meant to be cleaned and then put back in and the cleaning instructions are usually located near the filter itself.

Of course, in order to change your filter you’ll first have to be able to find it. Most of the time, the filter will be located near the blower towards the bottom of the furnace. However, if you’re not having much luck finding it, your owner’s manual should be able to tell you quickly where it is and how to remove it. Before you go to open the chamber and take the filter out, however, be sure you’ve turned off the power to the furnace.

Changing your furnace filter can help improve the air quality in your Silverado home and it is also very important when it comes to keeping your furnace running efficiently and effectively. The filters are there to trap airborne particles that can get into the blower and clog it up. When that happens, the performance of your furnace will likely drop and you’ll need to have a Silverado professional come out and complete the necessary repairs.

Continue Reading

Tags: , , ,
Posted in Services | Comments Off on Heating Maintenance Tip 1 : Did You Change that Furnace Filter?

Common Garden Grove Furnace Problems

Monday, January 2nd, 2012

When it comes to your home Garden Grove furnace, you simply want it to work all of the time. But just like any other piece of equipment, your furnace will have problems from time to time. A few of these are relatively simple to fix on your own, but for the most part you’ll need to call in someone to take care of the repairs for you.

However, before you can do that, you’ll need to recognize that a problem exists at all. And the earlier you notice the warning signs, the better off you’ll be. It’s always better to get a furnace problem taken care of right away than to wait until your furnace stops working completely.

It’s also good to remember that quite often the problems you’re having with your furnace are really originating with your thermostat. This is usually welcome news, as thermostats are much cheaper and easier to repair and replace than many other parts of your furnace. In fact, even if your furnace isn’t working at all, it may only be the result of a faulty thermostat.

Another problem you may start to notice is that one part of your Garden Grove house is being warmed more than another part. When this happens, it can be a sign that there is something wrong with the furnace, but it may also be that the pressure in your duct system is not balanced properly. A simple rebalancing of this system can have your house heating evenly again in no time.

You may also realize that your furnace seems to be cycling on and off too often. When a furnace is working properly, it will come on for a considerable period of time and then shut off until the temperature in the house drops below the desired level. However, some problems can cause your furnace to complete many short cycles rather than fewer short ones.

If this is happening to your furnace, there are several possible causes. Something might be wrong with the blower on the furnace or the thermostat might not be feeding the furnace the correct information. Another possibility is that your furnace’s air filter is dirty or clogged.

While there are sometimes simple and straightforward solutions to these types of common furnace problems, it’s best to call in a Garden Grove professional to have them take a look if you’re not sure where to start searching for a problem. In most cases you’ll need them to come out and make the necessary repairs anyway.

Continue Reading

Tags: , , , , ,
Posted in Services | Comments Off on Common Garden Grove Furnace Problems