Saddleback Plumbing Heating & Air Blog: Archive for December, 2011

A Question from Huntington Beach: What Is a Slab Leak and What Damage Can It Cause?

Friday, December 9th, 2011

Also known as a foundation leak, slab leaks can cause a serious problem in your Huntington Beach home. A typical cause of a slab leak occurs when the foundation for the home is poured. While the cement is still wet and setting, copper pipe is laid in to run wherever it needs to go for the plumbing system of the home. This is a fairly common practice.

The problem occurs when the copper piping is soft. As the cement hardens, any kinks, bends, nicks or other imperfections in the pipe are exacerbated. Over time, these problems can become more and more magnified, eventually resulting in one or more tiny leaks in the pipe. This causes water to leak directly into the concrete foundation.

This causes a number of problems for homeowners, both short-term and long-term. In the short-term, it reduces water pressure and increases water consumption, resulting in higher monthly bills for poorer water delivery. These are inconveniences and annoyances, but nothing compared to the long-term damage that a slab leak can cause.

The moisture in the foundation becomes a breeding ground for mold. This mold can spread throughout the foundation and the house, which is a serious health risk for you and your family. Mold and mildew spores negatively impact air quality and can lead to illness. Plus, the moisture weakens the foundation gradually over time. Eventually, you have a home that is less structurally sound and may succumb to mold, which can cause thousands of dollars to eradicate and repair.

Slab leaks can be repaired, but sometimes after repairing one, another will crop up shortly thereafter. However, they still must be repaired immediately before the problem spreads and becomes too big to handle.

There are a few different methods for repair, including breaking up the foundation with a jackhammer and laying new pipe or lining the existing pipe with epoxy. Consulting with a professional is the best way to figure out which method is right for you.

Common symptoms to detect slab leaks early are reduced water pressure or inexplicably high water bills. If you notice either of these occurring in your home, you may have a slab leak, so call a professional to get it checked out right away before it leads to much bigger problems.

Continue Reading

How to Make Your Santa Ana Heating System More Effective

Wednesday, December 7th, 2011

Everyone wants an effective heating system in Santa Ana– one that will provide steady, reliable heat without you having to spend hundreds of dollars each month on gas, oil or electricity. And while the best way to improve the efficiency of your heating system in most cases is to upgrade it, there are some simple things you can do around the house to boost its effectiveness. Here are some of the best:

  • Rearrange Furniture – Just having the heat on doesn’t necessarily ensure the heat entering your room is being distributed evenly. Move your furniture in such a way that there is a clear, unimpeded path from the registers and radiators to the rest of the room. Done properly, this will make it much easier to and faster to heat every room of your house.
  • Maximize Air Flow – Air flow can be maximized in a number of ways. Make sure you close any windows near a register or radiator and that you remove any large objects that might block air flow. You should also install things that can help move air like fans and always call someone in for changes to the arrangement of your vents or radiators.
  • Clean Registers or Radiators – The cleaner your radiators or dust registers are, the more efficiently they release their heat. Not only have that, but clean radiators and registers resulted in better indoor air quality. Weekly cleaning of each room’s heating source is highly recommended.
  • Install Ceiling Fans – Ceiling fans switched to blow down are incredibly effective for distributing air throughout the room. This will keep push warm air down and keeps cold air up – in effect, reducing the need for constant running of your furnace.

Effective heating is important to keep your home comfortable, reduce the cost of heating and prolong the lifespan of your furnace . You should also make sure your heating system is properly maintained throughout the year. Skipping maintenance visits (which are highly recommended annually) will put unnecessary stress on your system and shorten its lifespan substantially, not to mention the decrease in efficiency when heating your home.

Continue Reading

How a Ceiling Fan Can Help Heat Your Home

Monday, December 5th, 2011

Most people in Silverado who have ceiling fans never turn them on in the winter. They assume that the fan is designed solely to cool the house – after all, blowing air feels pretty nice doesn’t it? But, a ceiling fan can actually help to move heat around your home and lower your heating bill if used properly. Here are some tips to do just that.

Rotating Warm Air

Warm air naturally rises. So, when you turn on your furnace and the blower fan pushes warm air through your ductwork into the various rooms of your home, the warm air immediately rises to the ceiling. So, for the room to feel as comfortable as you want it, you must wait for enough heat to circulate into the room to displace the cold air that was already there.

However, instead of waiting for warm air to fill the room, you can circulate the warm air as it arrives with a ceiling fan. By turning on your ceiling fan and changing the direction so it blows down (which most people already have it set to), the warm air will be pushed toward the floor, mixing it smoothly into the room and keeping you more comfortable without having the furnace on constantly.

This does two things. First, it keeps the room comfortable regardless of when the furnace cycles on or off. Second, it keeps the thermostat reading stable so the furnace doesn’t cycle on and off so quickly. If the warm air regularly rises up and the lower levels begin to cool, your furnace will frequently turn on and off as it tries to maintain the same temperature.

A Low Cost Addition to Your Home

Ceiling fans are inexpensive and aesthetically pleasing. They move air throughout the room, keep warmth low where you need it and can help reduce your energy bill in multiple ways. If you’re not sure whether a ceiling fan is right for you, talk to a Silverado technician about just how much money one of these simple devices can save you. I bet you’ll be convinced.

Continue Reading

Why is My Furnace Turning On and Off? A Question from Laguna Beach

Friday, December 2nd, 2011

One of the most annoying things your furnace can do is to constantly keep turning on and off. This on-off cycling keeps your Laguna Beach home from heating up properly. This action – called short cycling – also requires more electricity and drives up utility bills.

Short cycling is caused by an overheated furnace, which triggers safety mechanisms and shuts down the furnace. After a brief interval and cooling down, the furnace starts up again the cycle keeps repeating itself. Not only is it an annoyance, it can also signal more serious problems. A leaking heat exchanger can cause a furnace to overheat – and produce deadly carbon monoxide gas.

If a furnace is working too hard and overheating, it is usually because of airflow in and out. Your home’s ventilation system needs to be clear of dirt, dust, and debris. The more blockage in your ductwork and vents, the more friction is created, slowing down airflow and ultimately ending with an overworked furnace that continues to cycle on and off. And a blocked exhaust vent, such as a chimney or dedicated exhaust vent, can also cause a furnace to work harder. Check for things like leaves or bird’s nests.

The blockage may also be coming from a clogged furnace filter. You should clean or replace your furnace filter after a visual inspection reveals any type of build-up of dust or dirt. Do this at least every three-six months.

If you have a two-speed fan on your furnace, it is recommended that you run the fan in low speed during the cold months and high speed in the warm months. The reason? Warm air is lighter and takes less force to move.

There are other measures to take to prevent short cycling but these usually require a professional heating and cooling service technician to correct the problem. If in doubt, call your local qualified heating and cooling contractor and schedule a furnace inspection. Don’t make your furnace work any harder than it was designed for – and keep your home’s occupants comfortable and safe.

Continue Reading