Saddleback Plumbing Heating & Air Blog: Archive for November, 2011

The Beauty of Zone Heating: A Tip from Brea

Monday, November 7th, 2011

While it might not technically be a necessity, there are a lot of reasons why you might want to look into having a zone heating system installed in your Brea home. Whether you’ve been using the same home heating system for a long time or are looking to have a new one installed, there’s never a bad time to have a zone heating system put in.

Most people think that the only thing that affects their home heating and cooling bills is the energy efficiency of their furnace. However, that’s simply not always the case. Certainly, the more efficient your furnace or heat pump is, the lower your energy bills will be. But that doesn’t mean they’re as low as they could possibly be.

After all, if you don’t have a zone control system installed, you’re paying to heat your entire house every time you turn on the heat. Depending on the size of your house, that could mean you’re heating anywhere from two to 10 rooms or more that are unoccupied at the time. In fact, you could be paying to heat an entire empty wing of your home. And while you’ll pay less than you would if your heating system was less efficient, you’re still paying more than you need to.

With a zone control system, you can heat your home much more efficiently because you can control which areas of the house get the heat and which ones don’t. You can set multiple different temperatures for the different zones of your home, which allows you to keep the occupied areas warm while not forcing you to waste energy to heat unoccupied spaces.

Aside from the economic benefits of only heating the areas of your home that you need, zone control systems also can put an end to some of those contentious thermostat wars that go on in so many households. If the members of your household can never agree on what a comfortable temperature is, they can simply each set their own temperature for their own area of the house.

That way, everyone is happy and no one has to suffer uncomfortably. After all, you paid a lot for your state of the art home heating system. It’s only fitting that you should be able to get the most possible out of it.

Continue Reading

Steps to Take Before Turning on Your Furnace: A Guide from Aliso Viejo

Friday, November 4th, 2011

You are feeling a chill in the air in Aliso Viejo. The outside temperatures are going down each day and the nighttime temperatures are forcing you to break out the flannel pajamas, robes, and blankets. It’s getting cooler and you are holding off turning on your furnace for the first time of the season, maybe because you envision high utility bills or you are afraid of what you’ll hear, feel, or see coming from your furnace after several months of inactivity.

There’s not much you can do to control higher utility bills, they are like death and taxes. But there are some things you can do to take the “mechanical anxiety” out of turning on your furnace for the first time.

You can’t go back in time but you may want to consider “summerizing” your furnace after you shut it down in preparation for the cooling season – or during the cooling season. Have a qualified heating and cooling technician give your furnace an inspection and cleaning.

A preseason inspection and cleaning will prevent some problems that may affect some of your senses later on. For example, a smell coming from your furnace may indicate a burning or smoldering electrical component. A noise may indicate a noisy fan or a loose belt, causing poor or no airflow. Touching your ventilation system and feeling for any vibration can indicate poor airflow. Visually checking your instruments like thermostats for verifying proper temperatures or a digital readout on our carbon monoxide alarm for any traces of harmful gas are also important to furnace start-up.

If something goes wrong, don’t blame it on your thermostat or the cold weather; blame it on a lack of preventive maintenance. Your best bet is to have a qualified service technician do a clean and inspection – to minimize any surprises at start-up and to keep you and the occupants of your home comfortable and safe while your furnace begins another season of hard work.

Continue Reading

It’s Time for a New Furnace: a Tip from Saddleback Plumbing

Wednesday, November 2nd, 2011

Replacing your furnace in your Santa Ana home is probably not something you want to think about. After all, a new furnace is a big investment and not something you probably have too much experience with. And sometimes having your current system fixed or tuned up is all you need to get your home heating situation back on track. But there are certain situations in which it makes more sense to just go ahead and get a new furnace rather than simply patching up the old one.

For instance, if you have to call for either minor or major repairs to your furnace on a regular basis, it’s probably time to consider investing in a replacement. All of those repairs cost money and chances are that the furnace you’re paying repeatedly to replace isn’t going to last that much longer anyway.

Rather than continuing to dump money into a furnace that just isn’t cutting it anymore, you’ll be better off making the investment in a new unit. The truth is, you’re going to have to do it sooner or later and by buying a new furnace now, you’re actually saving all of the money you would have spent on repairing the old one for another year or so.

Also, a furnace that requires such frequent repairs is probably not functioning all that efficiently either. When you replace it with a newer model, you won’t just save money on repairs. You’ll also likely notice a considerable savings on your monthly energy bills because of how much more efficient your new model is.

Even if you haven’t been repairing your furnace often, you may be able to notice some signs that the old unit isn’t quite up to the task anymore. If you’re suddenly having some significant humidity problems in your house or if your home isn’t being heated evenly, there’s a good chance your furnace is on its way out.

And, in fact, even if your furnace is functioning just fine but is more than 10 years old or so, it’s very likely you’d benefit by replacing it. That’s because the newer furnaces available now are so much more energy efficient than their predecessors that the savings you’ll incur monthly will quickly make up for the initial installation investment.

Of course, you don’t want to get rid of a good furnace if you don’t have to. But if your furnace is getting close to the end of its expected lifespan, you may very well benefit by putting out the money for a new one now so you can start saving right away on your monthly energy bills.

Continue Reading