Saddleback Plumbing Heating & Air Blog: Posts Tagged ‘Plumbing Repair’

Plumbing Tip : Common Causes of Plumbing Noises

Monday, July 2nd, 2012

With something as important as your Irvine plumbing system, you want to be sure that everything is working correctly and effectively. Many people, though, will ignore the signs that something is wrong as long as the water flows when it is supposed to. Not only are noises from your plumbing annoying, they are also indicators that there is a problem somewhere in your system. Here are some common noises and the fixes that may be needed to keep your plumbing quiet.

Gurgling Sounds from Drains

This is such a common problem that people may not even consider it one. If your drains are gurgling or making sucking sounds chances are that there is some kind of blockage in the drainpipe. The obstruction is forcing the water to squeeze past it, resulting in the gurgle. Hire an Irvine plumber to snake out your drain. You’ll be surprised at how quiet draining your sink or tub can be.

Screeching or Squeaking Sounds

More often than not this sort of noise is the result of rusty or ill-fitting parts. If you have an irregular washer, for instance, it can restrict the flow of water through the pipe, and the force of the water pushing past the washer can result in the screech. Call in a plumber to pinpoint the location of the problem; often all it will take to repair is replacing a part.

Banging Sounds

If your pipes are banging when you have the water on, chances are that it is in fact an external problem. If your pipe connections are loose or improperly secured then your pipes have enough room to move around. The banging is the result of their hitting fixtures. Have a plumber inspect your system while turning the water on and off. All that may be required after locating the source of the banging is the tightening of some fixtures.

Water Hammering

Water hammering is the term for the banging in your water pipes when you turn the water off, not on. It is the result of an abrupt stop in the flow of the water in your pipes, like when you quickly turn off the water. Pressure builds behind the remaining water in the pipes and causes the hammering. If enough pressure builds, this situation can easily become a more serious problem. Call a plumber if you are experiencing water hammering.

These are just a few of the problems that are indicated by noise in your plumbing system. There are many other possible issues, and some can be quite serious. Call Saddleback Plumbing, Heating & Air Conditioning today if you have any concerns with your Irvine plumbing.

Continue Reading

Laguna Niguel Plumbing Repair – Review from M.A.

Wednesday, December 28th, 2011

When you have a plumbing emergency, it is very important to have a plumber that you can count on. You not only want them to be technically skilled, but you also want superior customer service so you know that your problem will be taken care of right away. A good plumber will also answer any questions you might have and perform work that exceeds your expectations.

At Saddleback plumbing, we don’t just promise great service and repair, we deliver it. That is why so much of our business comes from repeat customers. Here is what M.A. in Laguna Niguel wrote to us about his plumbing repair:

Just a quick note to let you know how happy I am with your company. I have had a few plumbing issues and Saddleback Plumbing, Inc. has never let me down. Every step of contact with your company has been positive… I am a customer service expert/advisor. It is a rare occasion when I come across true customer service. … I will always be a customer and sing the praises of Saddleback Plumbing, Inc. and Jared [who went above and beyond the call]. Thanks for maintaining a locally owned company that serves our community with such professionalism and concern.

– M.A. Laguna Niguel, CA

Thank you for choosing Saddleback! Whether your sink is clogged or your furnace has stopped working, our expert technicians will fix the problem as quickly as possible. Don’t hesitate to call for repairs this winter, stopping a problem early can save you a lot of money in the long run!

Continue Reading

DIY Plumbing Tip 2 : How to Change a Drain Trap

Monday, December 19th, 2011

Have you ever noticed that U-shaped length of pipe below your Dove Canyon home’s bathroom or kitchen sink? Does it ever seem to you like it doesn’t make sense to have that in there? It seems counterintuitive to have the water run any direction other than straight down.

Well, that little bend is the drain trap, and it keeps nasty odors and gases from wafting their way up through the plumbing and into your home. The U shape of the trap precludes the normal upward drift of the gases, so they don’t make it up through your drain.

After a while, these traps can become corroded, choked with debris or entirely clogged to such a degree that it needs to be replaced. When this happens, it is important to take care of this right away.

As with any plumbing project, the first step is to turn off the main water supply. Don’t worry about the inconvenience; the whole process will take less than an hour.

Next, remove all the pieces of the existing drain trap. Use a pipe wrench and/or slip-joint pliers to remove the nuts and pull the trap free. Attach a tailpiece washer to your new tailpiece, and then attach the tailpiece to the sink strainer. You may need to cut the tailpiece to length with a hacksaw.

With a slip nut and washer, affix the trap arm to the drain stub. Again, you may need to cut the trap arm to length.

Finally, attach the trap bend to the trap arm, making sure the beveled face of the washer faces the trap bend. Tighten all the nuts and turn the water back on. Run a little water down the drain and check for leaks before using it. You may need to tighten some joints or apply Teflon tape in some places.

Once everything is all sealed up, you’re good to go! Your new drain trap is in place and ready to use.

Continue Reading

A Question from Huntington Beach: What Is a Slab Leak and What Damage Can It Cause?

Friday, December 9th, 2011

Also known as a foundation leak, slab leaks can cause a serious problem in your Huntington Beach home. A typical cause of a slab leak occurs when the foundation for the home is poured. While the cement is still wet and setting, copper pipe is laid in to run wherever it needs to go for the plumbing system of the home. This is a fairly common practice.

The problem occurs when the copper piping is soft. As the cement hardens, any kinks, bends, nicks or other imperfections in the pipe are exacerbated. Over time, these problems can become more and more magnified, eventually resulting in one or more tiny leaks in the pipe. This causes water to leak directly into the concrete foundation.

This causes a number of problems for homeowners, both short-term and long-term. In the short-term, it reduces water pressure and increases water consumption, resulting in higher monthly bills for poorer water delivery. These are inconveniences and annoyances, but nothing compared to the long-term damage that a slab leak can cause.

The moisture in the foundation becomes a breeding ground for mold. This mold can spread throughout the foundation and the house, which is a serious health risk for you and your family. Mold and mildew spores negatively impact air quality and can lead to illness. Plus, the moisture weakens the foundation gradually over time. Eventually, you have a home that is less structurally sound and may succumb to mold, which can cause thousands of dollars to eradicate and repair.

Slab leaks can be repaired, but sometimes after repairing one, another will crop up shortly thereafter. However, they still must be repaired immediately before the problem spreads and becomes too big to handle.

There are a few different methods for repair, including breaking up the foundation with a jackhammer and laying new pipe or lining the existing pipe with epoxy. Consulting with a professional is the best way to figure out which method is right for you.

Common symptoms to detect slab leaks early are reduced water pressure or inexplicably high water bills. If you notice either of these occurring in your home, you may have a slab leak, so call a professional to get it checked out right away before it leads to much bigger problems.

Continue Reading

Testimonial – Tim B. from Santa Ana

Monday, November 21st, 2011

Water damage can be very destructive and very expensive to repair. That is why it is so important to catch plumbing problems early and repair them competently. And our plumbers make sure to do the job right the first time; here is what Tim B. from Santa Ana wrote to us about his plumbing installation and repair:

I’m writing to let you know how happy I am with the service Ken Smith provided to us today. I originally had Ken out to install a new kitchen faucet.

After he expertly completed that job, I told him about some problems we started having the day before with our hot water flow. The day before, a hack “contractor” installed a shower valve – and that is when the problems started. Ken took one look at what the previous guy had done and saw major issues. He took the time to fix the previous contractors huge screw-up and patiently answered the many questions I had about what he was doing and how the shower plumbing worked.

The project was set to tile in (and over) the bad plumbing job the next day. Had Ken not spotted and fixed the trouble, the problem would have been 10 times worse and a lot more expensive in 24 hours.

Thanks a million Ken for your hard work and dedication to getting the job done right. I owe you!

I’ll be calling Saddleback Plumbing and requesting Ken for anything regarding plumbing in the future.

– Tim B.

Continue Reading

Detecting Leaks with Your Water Meter in Costa Mesa

Monday, October 10th, 2011

When you notice a leak in your Costa Mesa home’s plumbing, you fix it right away, but what happens when you don’t notice a leak for days or even weeks? The damage it causes can have a profound impact on your water bill and the good repair of your home. To avoid hidden leaks – the ones that hide in your walls or your yard, keep a close eye on your water meter.

The Hidden Leaks

Obvious leaks are…well, they’re obvious. They pour water down the walls, leave puddles in your bathroom or create ponds in your backyard. Unfortunately, the majority of leaks are much less obvious. They result from small drips between pipe joints in your walls or a hairline fracture in your water main or drain pipes. They may not even appear where you can see them.

If this happens, it’s important to have a keen eye for the signs that a water leak has occurred. Specifically, look for jumps in your water meter readings.

Watching the Water Meter

Your water meter tracks every drop of water consumed by your family. To check for water loss, record the reading at the same time every day and watch how it changes. To be sure of a leak, you can turn off all the fixtures in your home and watch for the meter to move. If the meter moves despite the fact that no one in your home is consuming any water, it is likely a leak.

You can also compare your bills from one month to the next. If your bill rises suddenly, without any clear reason, check the meter readings and the rates. If the meter reading increased suddenly and the water rate did not, there might be a leak to blame. If that’s the case, call a professional to inspect your water lines immediately – what is hidden to you might be a relatively obvious, straightforward repair to someone else.

Continue Reading

Causes of Common Plumbing Disasters

Friday, September 16th, 2011

What are some of the costliest repairs in your Cowan Heights home? Costly can be characterized by lost money or lost time – or both. You may have experienced some of these so-called “disasters” and wondered what you could have done to prevent them. In particular, let’s talk about disasters of the wet variety – plumbing problems.

It goes without saying that nothing is built to last. Parts and products will eventually wear out and need to be repaired or replaced. But the rate of repair or replacement has a lot to do with how well things are maintained, especially common plumbing fixtures and appliances in the home. In order to identify some of the disasters caused by plumbing fixtures and appliances, let’s identify the source of the problems – and their location in the home.

We spend a lot of time in the bathroom so let’s start there first. What disasters happen in the bathroom? At least three come to mind: running toilet, leaking shower head, and clogged sink (also found in the kitchen so let’s kill two birds with one stone here). First, the toilet.

A running toilet is annoying and wastes several gallons of water by the hour. It is often caused by a defective flapper inside the tank, not properly sealed and causing water to leak from the tank. Next, the shower head. Leaks often occur when something as simple as a small rubber washer is worn out, breaking the seal and allowing water to leak. Lastly, the clogged sink. The most common culprit of a clogged sink is something that will not decompose or wash away, namely human hair, bits of plastic or fingernails, etc.

All of these bathroom backups can cause extensive water damage to walls or floors. In the most severe cases, a bathroom’s structure can be compromised by something as small as a dripping faucet – if left unchecked over time.

The next place we spend a lot of time is in the kitchen, another prime area for plumbing disasters. Two appliances that drive homeowners nuts (when malfunctioning) are garbage disposals and refrigerator ice makers.

First of all, garbage disposals are not made to dispose of everything. Utensils, plastics, bones and other goodies do not grind up but rather, bind up a disposal. A backed up disposal can shut down the sink drain and spill over its top. Just as annoying is a refrigerator icemaker, which depends on a plastic or copper tube for its water source. A break in the tube or crimp in the copper line can back up the water and cause a major leak behind or below the refrigerator. And like the bathrooms disasters, damaged flooring and walls can be the result.

Maybe the biggest plumbing disaster of all comes from something unseen by the naked eye: frozen water pipes in crawl spaces or attics. Water pipes in uninsulated areas can freeze when outside temperatures fall below the freezing mark. Often, homeowners are unaware of the problem because they are away from the home for extended periods of time or have failed to properly insulate pipes, crawl spaces, or attics. Frozen pipes can burst, causing extensive damage and lead to an even more dangerous situation: mold growth.

How can you avoid common disasters? Make sure your fixtures and appliances are maintained and if needed, serviced by a professional plumber. You may also want your plumber to give you a whole-house inspection, which can pinpoint potential trouble spots where your next plumbing disaster might be brewing

Continue Reading

How Can I Fix a Leaky Faucet? A Question From Irvine

Monday, September 12th, 2011

Leaky faucets certainly are not the type of emergency you want to call an Irvine plumber for, but they are also pretty inconvenient and annoying. Fortunately, they are often quite easy to fix. The proper procedure for fixing a leak in your faucet will depend on the type of faucet you have, but it is always a relatively simple task.

If you know what type of faucet you have, you are ahead of the game. But if you do not, you will need to take your faucet apart first to see what is going on in there. Especially in older homes, the most common type of faucet is a compression faucet. This means that inside the faucet there is a rubber washer that helps to create the seal when the faucet is tightened.

When faucets like this leak, chances are it is simply because the washer has worn out and needs to be replaced. Before you can start working, you will first need to turn off the flow of water to your sink. There should be a couple of knobs under the sink that allow you to do this. And be sure to cover or plug the drain before you begin so that you do not accidentally drop anything down it as you are working.

Once you have set yourself up, unscrew the faucet handles (or whichever one is leaking) and remove the outer part. At this point, you should be able to see the washer. Simply remove it and replace it with a new one and then put the faucet handle back on and you should be as good as new. These types of washers tend to wear out from time to time, so  you will probably have to do this again in a few years or so.

When you are replacing your washers, though, it is important to remember a couple of things. First, if you are unsure about what type of washer to put in your faucet, take the old one to the store with you and ask a salesperson for help. You want to make sure that the washer you put in is exactly the right fit for your fixture so it is worth taking the extra step to ensure that you have the right piece.

And after you have taken apart the faucet, it is a good idea to check the stem to see if that has worn out and needs to be replaced as well.

Continue Reading

How Do I Stop My Pipes from Knocking?

Wednesday, August 3rd, 2011

Tell me if this sounds familiar – you are sleeping comfortably and in the middle of the night a soft but persistent knock sounds through the pipes in your home. At first it is easy to ignore, but inevitably the sound will grow with each passing night and eventually start keeping you awake. You feel like they can be heard all over Capistrano Beach! Luckily, there are simple solutions for knocking pipes that do not require a plumber or expensive parts.

First, it is good to know why your pipes are knocking in the first place. In most cases, knocking pipes are caused by variable water pressure in the main supply pipes coming into your home. That pressure is important because it keeps the water moving freely between pipes and into your faucets. However, when the air used in pressurizing those pipes leaks or is depleted, water moves suddenly and violently, creating the knocking sound as it traverses the length of the supply lines.

The easiest fix for this kind of knocking is to first turn off your main supply valve. Make sure you communicate to anyone in your home that you are shutting off the valve as it will stop ALL water coming in. Now, flush the lines by opening all of the faucets and flushing your toilets. Water can still leave your home through drainage pipes and this will ensure all of the supply lines are fully empty.

Once the lines are cleared, feel free to turn your main valve back on. It is important to do this slowly so that the air chambers between and around your pipes have time to refill before the water courses back into them. However, now that the pipes were fully emptied, the knocking sound should be completely gone.

It is as simple as that. In most cases, you should not need to call a plumber to help, but if you have any problems finding your main valve or shutting it off, a plumber can be helpful with the proper tools and the knowhow for various kinds of shutoff valves. Additionally, if you live in an apartment building or a shared space, you may not be able to perform this fix. Rather, you should contact your superintendent or landlord and make sure they know exactly what is happening – with any experience, they should recognize the problem and be able to make similar fixes to your pipes.

Knocking pipes can be incredibly frustrating if not dealt with as soon as they start. Now that you know how simple it is to make the fix, make a habit of regularly flushing your lines and the knocking likely will not start up again.

Continue Reading